Search results

Ground the green wire at the B1 plug. Its the signal for the circuit opening relay. http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=54 The tt 1jz does not require a resistor pack, not sure about the others.

I think its ridiculous, you want someone else to be liable for your use and destruction of cheap china parts. Grow up, with your experience being around a shop, you should have already learned that customers like that SUCK. The reason Aaron likely does not get many of them back, is because it...

The actual smog law has nothing to do with how loud the car is. Local laws yes, but that has nothing to do with smog. CA SMOG says, the exhaust has to be stock and complete until the last emissions component. So if you have a post cat O2 sensor, you could basically cut off the exhaust after the...

What did you do with the fuseable link (smaller gauge wire) that used to be at the positive terminal? The small wire (fuseable link) goes to the starter, or all the way back to the battery (either one works.) Remove the wire you installed from the starter to the alternator, actually, just hook...

I just looked, i dodnt see anything etched into the windows. Just TOYOTA and TEMPERED, with some other writing. Where on the windows do you find it?

Take apart a connector from a junk o2 sensor and make a proper jumper tool. Paper clips are for amateurs.

Just thought id poke in here to say, I am planning on making the trip over for the meet. There may be a couple others from madison that are planning on making it also. Anyone know of any decent hotel in the area. I dont think ill drive home that night. Looking forward to meeting you guys.

If you have the trans mount installed, the tranny is not jacked up all the way. Remove the mount and jack it up farther, its tight but itll fit.

Here you go. http://www.supramania.com/forums/showthread.php?137883-How-to-Replace-a-MKIII-Driveshaft-Carrier-Bearing-for-50&highlight=carrier

^pinpoint the voltage drops to a specific connection, and make adjustments. I have had to redo a couple connections since I relocated my battery.

Yes you still use the same driveshaft between 7m and 1jz. No, the support is different from auto to manual.

Stock rad, stock fan shroud, sc300 fan and clutch. I had to use spacers to get the fan blades away from the water neck, though.

Spk plugs look clean as a whistle with BHG... And usually it would be only a few cyls. All of these look exactly the same. Those plugs look fine, IMO.

Hmm Id rather not. That means driving late in the day both times (after a long day). You can handle getting up early one day, cant ya? AKA there is no way I am trying to drive up there after work. Or driving back after the meet gets done (when ever that is). Besides its pretty likely I would...

I have begun making arrangements to make it up there. Looks like we should be well on our way by 6AM. Should we plan on meeting somewhere near east town, at 5 and plan to be on the road by 5:30? (to early?) Any Milwaukee guys make it to mad town by 5AM? I dont feel like driving 10 hrs that...

Many cressida parts are interchangeable. Why do you ask anyways?

BHG may have toasted the o2 sensor driving it rich in closed loop. Try disconnecting it.

Nothing like a mkiii with fresh paint. Props.

JJ is right, unless it's CARB approved, it's illegal. There is a short list of things you ARE aloud to modify ( intercooler being one of them). There is not even an approved intake manifold for these cars Your beat bet would be to have a spare motor, you throw in when it's smog time. I t...

Check for play in the bushings in the knuckle.