Search results

Why don't you put the resistors in place of the existing ones? For blue you would change the resistors to incease the output voltage as the stock setup is generally lower than what most blue LEDs take to power on. Putting higher value resistors may turn off the LEDs completely. How does your...

They are twist in bulbs not LEDs #194 or whatever the number is.

That looks really nice, wonder how the fitment is. You could make that piece for less than $50 including the couplers though.

When I took my dash off the LEDs were white with green sleeves over them. Are those the factory LEDs or has someone replaced them at some point? Anyways I removed the sleeves and put them in as white and it looks good IMO aside from a few hot spots. Maybe I will tint the bulbs or use a cooler...

What the hell are you talking about its made of aluminum. Sure it IS heavier than the plastic piece but probably only by 1/4 of a lb. Stop eating mcdonalds if you are THAT woried about weight. Anyways, that peice looks really nice and the script makes it even better. I need something...

The trick will be to keep them in there original locations so the OEM hoses can be used with the sensors.

is everything welded in those latest pics?

245/45/17 front 275/40/17 rear Eagle F1 GSD3's on mk4 TT wheels

You can get chrome ceramic coating.

Ansys is a VERY powerful program. How acurate are his models? Were they measured with a caliper and modeled or were they scanned with a 3D scanner to get acurate dimensions? CMM? The reason I ask is that measuring a fillet radius is very difficult by hand and that seems to be the critical...

For reference a friend of mine bought a full poly bushing kit for his 1984 mazda rx-7 for $150cdn from a canadian shop. (canadian shops have huge markup on american parts). At $600 for a kit we are getting horendously raped. We need more options and competive pricing!!!! I had mentioned...

^ PM to the admin should have worked...

Hook all you want but you won't break a 13 :sarcasm::evil2:

Drill a hole in the gas cap? Yikes. Buy a vented gas cap.

http://www.cygnusx1.net/Supra/Library/EPC/291220/catalog.aspx?F=1703&P=2

There was a local guy that put a GT40 compressor wheel into a CT26. Dyno'd 420whp@20psi At 23psi the tires break loose at 100km/h which doesn't happen at 20psi so it should have made more power than it dynoed but the dyno could load the car properly at 23psi.

I am looking for the part number of the screws with the square heads that slide into the rear trim in order to secure the trim to the body. The trim piece that wraps around the side and rear of the car under the tail lights. I tried looking on the TSRM but from the diagram I found none of the...

Where can I buy this Stopper? Edit: I see that it comes with most Lokar cables. I understand how it works now after seeing a picture. I will buy the 36" and cut to size and re-attach the end. Thanks!

Oh my bad. I haven't held stock cam gears in a few years, I was just judging by the picture and how it is yellow and assumed it was zinc plating.