Search results

Here is the JDM gray 440's Also pink are 440's from VVTi 2jzgte Who wants to send a set of "550" to RC for cleaning and flow testing? If you claim to have 550's but have no way of showing it please PM me and I will give you full details on how to do it and at a...

Here is one of the injectors I sent out. With the flow chart and all the other Info. the part number is on the paper also. check your part number with the one on the paper and lets get to the bottom of this.

I would put it in a Toyota pickup so I can tow around parts, but I rather have a 22R, it's reliable!

Yes I had the US 550's flowed and they came back as 440. But not one person had theirs flow tested. This myth is busted untill some can prove that US 550's are 550's

Here is the original pictures of the block when Urbano and the owner on the top left were preping the engine to be installed. Here is us now with the same block being silly! :icon_razz Block No. 6050772

Well here are some more pictures of the build. We started off with the first 1jz block that was installed here in Cali by Mike U. The crank was race prep and fully balanced, after all that it was nitride coated and cryogenically treated. The Rods were shot peen, balanced. The pistons were coated...

I have a set of twins for sale. 100 bucks and they are yours. :naughty:

Why do you want that when you could of had HKS twins! BTW I'm loving my HKS twins! :icon_razz

Well the Engine finally blew on the Supra. It lasted a long time and lots of fun miles were on that engine. First four cylinders were at 180 PSI No.5 was at 60 PSI and N0.6 was at 130 PSI. This happened two weeks ago and I still drove the car. I have now installed the new engine with the HKS...

One block was forged pistons and the other one is not! Nice!

Have the cams Degreed jay! :3d_frown: ::dead horse:: Always wanted to use that smiley! :biglaugh:

I ran a LS2 GTO on the freeway with a budy in the car(Rohan) It wasn't that impressive. At 1 bar I was right next to him untill I ran out of room at 130 MPH.

Hello Adam, No matter how many times you try to gide someone in the right direction, they will never listen. We never liked the clips (JZZ30's) that Gspeed had in stock, they were all dirty and beat. I was there this mourning checking a few other things out and they dont have much 1jz...

The seal was installed to far in and not flush with the seal holder.

Very nice!

That is going to sit flush! FTMFW! roll all fenders!

Yes, they can be fixed. I have cracked wheels before.

Or the wrong Valve seals :icon_razz

We drove the car last night (03/02) ! :evil2: :drink1: Aaron has Videos and pictures.

When i needed parts to rebuild it, they would tell me that they dont make it for jza70 anymore but if I asked if they have it for jzx90 they said, Oh yea we have that clutch, but we dont sell replacement parts for it. TRD USA sucks ass and that is why they dont exist here anymore. I give it one...