Search results

I'm not sure... My guess would be that you'd be scraping dry rings against the cyl walls which is bad.

So you're parting this out... right? ;) Nice find! You should really consider getting some XR racing floor mats for that and giving those poor stock ones to Heidi and I.

Nice work Bro!

It sounds like he may have gotten lucky...

Nice! Having a chum of a machinest will save you tons in the end.

Allan, every race shop I've visited out here in the states has laughed at me when I ask them about balancing the 7m crank. With the inherent design of a straight 6, every pair of pistons moving upward has two other sets of pistons moving up or down in perfect harmony to balance the overall...

The red stuff is awesome! It litterally disolves into the oil once pressure is built and doesn't destroy the filter like moly lube does. That said, I've never used it and I always have a large tube o' moly lube at my side... Ian... Tisk tisk mister anal retentive. Looks good bro, I'm going...

13.3@98. Most of my pulls were around 105 mph, but this one was quikest. 1.86 60 ft, street tires, 225-50-16s. Mods were .020" over rebuild, RT downpipe, gutted cat, cheap k&N on a hks adapter, lexus/550s, avc-r set to 1 bar, greddy bov and stock everything else. exhaust, ic, pipes, fpr...

Congrats, Jay! It is a pleasure to pass the torch onto such a well maintained car with some nice power, too! What are you going to do with your MDC cash? ;) Thanks for keeping ROTM going Jon!

well, the harness showed up and it was for the "traditional" plug. The reason I want to keep the stock wiring is for simplicity, and since the vehicle has a sub as well, I'd rather use wiring that is here, now, than run two more rca's. And I'm not even sure if the deck has three pre-outs...

Hey guys, I misposted this in the general section... So here's the thing. I need the wire designations between the stock deck and amp so I can replace both with alpine units. Here's the link... http://www.supramania.com/forums/showthread.php?t=23915 Thanks Fella's -Jake

Here's why I'm confused... As you can see, most of the colors are represented on both sides of the amp. The problem wire is lg (light green). Since lg is missing, I have no reasoning other than a hunch to assume that the other colors go through the amp without changing color. So a wire by...

Hey bud, I'm installing an Alpine deck with some alpine Type S seperates with a V-power amp under the seat like the factory 90+ cd equipped cars. (this is a 92) What I need is the wire colors from the deck to the amp, which color goes to which speaker, and so on. I've foud the TEWD pic, and it...

two hardtops, 4 targas at the moment...

Nice, huh? I hit tab instead of shift, and then hit enter...

Ok, I'm installing an alpine deck and amp in a 92 that has the stock amp under the seat. I need to know the wire colors from the deck to the amp for each speaker. I have the colors from the amp to the speakers, but the diagrams don't show which wires do what between the amp and deck. I'm...

You better not scratch that bay putting the beast back in! That snail looks strangely familiar... Nice work Ron! I love the anal-retentive attention to detail Duane! Our oil cooler is bigger than yours! ;) Why aren't there ARP bolts holding your cams in???

Valves = grotesque, but the cams still look nice...

Those cam journals are beautiful!

Well, as I see it, You're going to be looking at several machining costs. 1.) Number 5 is 1 thou too small for even the smallest toyota bearing. You will need a crank grind to pull all journals down .010" to get them all into spec. In the US, that's around $85 2.) I would recomend...