Search results

  1. DeMoN2318

    What did you do to your supra today? Pics

    Cleared my pool table by finishing suspension
  2. DeMoN2318

    Best suspension upgrades

    If your alignment is pretty good now, and you measure closely and take your time you will be fine for a month or so. Obviously dont track it or drive too wild until you get the alignment done but for daily driving it should be fine. If you get this phase done and are driving it and you can...
  3. DeMoN2318

    Best suspension upgrades

    You can still install your traction and camber bars...you will just have to loosen the traction and swing it down to install the toe when you get it...no biggie. I just thought if your toe was gonna be a few days longer than the traction and camber than you should just wait and do it all at...
  4. DeMoN2318

    Is fuel cut dangerous?

    My bad...I do remember reading that somewhere.
  5. DeMoN2318

    Is fuel cut dangerous?

    Is there anyway to adjust the boost without having a tuneable ECU? Is there a boost controler that can be used with the stock ct26? I can't get through third without hitting fuel cut...
  6. DeMoN2318

    Best suspension upgrades

    If you are getting the toe bars too you should wait till you get all three sets before installing. You have to install the toe before the traction. Hopefully they fixed this with the new red bars but the stock cam bolts wouldnt fit through the heim joints...I was deleting the cams anyways so...
  7. DeMoN2318

    Is fuel cut dangerous?

    Probabaly just because it is pretty violent when it happens. I know when I first hit fuel cut when I bought my first turbo I was like WTF!! Did I blow the motor already? It's just a shock when you are pulling hard then lose all power and jerk forward.
  8. DeMoN2318

    Best suspension upgrades

    The bars have opposite threads on each end...so you just rotate the bar and it shortens or lengthens...infinitely adjustable. Then tighten the nuts so the bar cant rotate.
  9. DeMoN2318

    BIC DDP + Vibrant Muffler = white smoke on throttle release

    IC is a newer FM and only has 15k miles on it...but I will definitely do this next time I have the IC accessible. Thanks for all of the advice and info
  10. DeMoN2318

    Best suspension upgrades

    Cant I just adjust the arm length to align? Cam washers just move the bars in and out right?
  11. DeMoN2318

    BIC DDP + Vibrant Muffler = white smoke on throttle release

    I have not checked for blow by yet. It does not smoke at idle when its cold...I didnt rev it when cold though. Seems to only give a puff when I let off the throttle at higher RPMs Keep in mind that I have only run it in the garage on stands...havent had it on the road yet to check for smoke...
  12. DeMoN2318

    BIC DDP + Vibrant Muffler = white smoke on throttle release

    Downpipe to muffler is all the same...test pipe and cooleze It has not been driven in about 9 months...I did start it about once a month to move oil around...could some of the oil seals have taken a set? maybe they will swell back up some when I start to drive it more? It's a small amount...
  13. DeMoN2318

    Best suspension upgrades

    You can get a remaned Rack and Pinion from RockAuto
  14. DeMoN2318

    BIC DDP + Vibrant Muffler = white smoke on throttle release

    I just changed the downpipe and there was no oil in the one I removed. I did not visually check the turbine wheel (couldnt really see it) but I felt it and spun it by hand and did not have oil on my fingers afterwards
  15. DeMoN2318

    BIC DDP + Vibrant Muffler = white smoke on throttle release

    I made sure it was warm and let it idle for a while before reving it...I only reved it to around 5000. I have small traces of oil in the IC pipes before the IC...enough to show a residue but not enough to form a puddle or droplet.
  16. DeMoN2318

    BIC DDP + Vibrant Muffler = white smoke on throttle release

    Vid should work now PCV is all in good condition. I'm thinking it might just be left over residue in the pipes from the JetHot coating I had done...If it continues then its obviously not. But this video is the only time I've run it since the new exhaust, should (hopefully) drive it this...
  17. DeMoN2318

    Best suspension upgrades

    DM has toe links... http://store.driftmotion.com/static/i-bvmk3suprareartoelinks.php Front suspension...you already have coilovers...I'd say new lower ball joints that are greasable, new tie rods (if you install steering spacers you might as well since they will be off), new upper...
  18. DeMoN2318

    Best suspension upgrades

    Yea I eliminated the stock cams since the bars are adjustable. I still have the cams on the front lower control arms
  19. DeMoN2318

    Best suspension upgrades

    Beech's are very similar to the Battle Version, except Beech's chamber and traction bars are only adjustable on one side, but BVs Toe is only adjustable on one side...mix n match maybe? About the same price for all 6... BVs are also a sick red color!! I'm pissed cause I bought mine when they...
  20. DeMoN2318

    Best suspension upgrades

    You getting the Battle Version Arms from Drift Motion? I just installed them and it went pretty smooth...had to make washers to replace the cam washers and had to buy different bolts but nothing a few trips to Ace didnt solve. The Toe Links also have thicker sway bar end link mount tabs Be...