Search results

Im not sure by the way the coil needs to twist/rotate in from the bottom the plate would come straight up like your thinking unless the cut out became much larger.

Flow was a big discussion on the DSM boards. I saved a animated cfd that shows this, and flow is pretty equal in a boosted application. Ill locate it when I get home. I also think, unless your building a track only car, a 65-70mm t/b is more than plenty. larger and you start to lose off...

I have a bunch of half inch tubing left over from my fuel system install. so not very much sine youll only need like 6 inches. and thats with the end user trimming to proper length. I could possibly get the rest of hardware if I knew what people were using. I made a LQ9 coil bracket...

Ive been running a Spal pwm type fan controller for almost a year now with zero issues. Theres some present on temps or you can setup your own. Its nice that it comes on 50% speed at a lower temp and full on by your high temp. It comes on slow enough you have no idea it even came on, so...

Base price is 26.00 plus the under mount grinding. The more under mounts, the less the charge will be. Screen Name-First name/initial-Quanity-Grinding for under mount-Shipping Zip code. morganson / ? / 2 / _ / PAID AbsoluteSpeed / Franco R / Qty-1 / Top mount please / T5T-3L7 (Canada)...

I'll give PP info once there ready. I don't like collecting ahead of time.

Base price is 26.00 plus the under mount grinding. The more under mounts, the less the charge will be. Screen Name-First name/initial-Quanity-Grinding for under mount-Shipping Zip code. morganson / ? / 2 / _ / PAID AbsoluteSpeed / Franco R / Qty-1 / Top mount please / T5T-3L7 (Canada)...

Base price is 26.00 plus the under mount grinding. The more under mounts, the less the charge will be. Screen Name-First name/initial-Quanity-Grinding for under mount-Shipping Zip code. morganson / ? / 2 / _ / PAID AbsoluteSpeed / Franco R / Qty-1 / Top mount please / T5T-3L7 (Canada)...

sounds like the 1/2 ss tube would work. I just need a length.

And yes, I can supply spacers. Just need to know the inner diameter and length.. I can cut some 1/as tube or something? ss

OK, each forum is a little different and when quoted wide like that its hard to read on my phone. Base price is 26.00 plus the under mount grinding. The more under mounts, the less the charge will be. Screen Name-First name/initial-Quanity-Grinding for under mount-Shipping Zip code. morganson...

Sorry guys, got busy welding out a header I did and some fuel rails for the Volvo forum Im on. I also MSing a 22re and am fitting a DSM CAS to the stock 22re distributor for triggering. I have done groupbuys before, and filtering through a ton of PM's is hard to keep track of. I dont mind...

I have these cut, my table was steaming when I got done! In a bit, Ill head upstairs and start a post here and just have everyone quote and add there name, that way its in one place for me to keep track.

DIY makes a 4 inch wheel. Looks pointed, but Im sure you enough of a valley to make it work. Not sure how much smaller you could make it. http://www.diyautotune.com/catalog/361-trigger-wheel-p-182.html, I would agree with hvyman, run the 2j sensors or install the 7m cps.

Im using that dual vr board for vss conditioners.

Because you will. Once you have the ecu installed you start to realize all the things you can do, its nice to have it all. The one advantage that Pro has over the MS3X, is all the features are enabled and there no jumpers to run ever. You do have to use an external MAP sensor, but thats...

CP059 from duralast or omnispark. I found mine at Orielys. If you have spring issues like I did, MOJO Performance has some kickass springs Im running now.

No problem, I plan on cutting a bunch on Saturday. I expect the mailing boxes next week.

Just ordered the trianglular pritority boxes.