Search results

I don't quite get that last setup as the goal is to reburn the vapors in the engine thereby eleminating the hydrocarbons, but by just sending the fumes into the exhaust... I guess some will burn due to the heat, but I think that would just be sending blowby gases out the pipe and into the air...

~5 'cause Albino Supra just don't cut it with me... and besides... hell, I just wanted to post!

First, let me tell you that there is a search button that may have helped you as this is a topic that surfaces quite often. To burb the system on a MkIII, you need to do the following: Raise the front of the car either by parking it on a hill or jacking the front until the muffler tips are...

I'll be the first. :ttiwwp: A guess would be the relay for the A/C fans.

Your question is not very clear, but I am guessing it is an issue some owners have. The timing belt pulley which is behind the crank dampner/cover has a lip on both sides and the front one sometimes breaks off. This causes the belt to move off the pulley. You need to tack the ring back onto the...

I spoke to Samual about the lip, and he said that he was going to register and tell the storey...

It's a shame that not many north-eastern USA Supras make the Montreal trip. In just 3 years, this event has grown to over 50 attendies for the Show&Shine and this year, with the invites to the Rx7 and RHD clubs, there was some good traffic on the drag strip. So... All you neighbours to the...

A crack in the small rubber elbow coolant hose at the back of the motor / head which is a common issue if not changed recently. The hose goes dry from all the heat and eventually busts. A PITA to get at if you've got a turbo. Yellow /green definitely sounds like coolant. Can the heater core...

Though the Toyota stock gasket is good (IMO of course), the main problem is with the head bolts (easy stretch) and the torque settings (way to low). ARP bolts or studs should replace the original Toyota bolts. If your mechanic (or you) rebuilt the engine but used all the original stock settings...

Stock 7m with original torque settings = blown head gasket for sure... There is not one owner that I know who has not had to redo the head at one point from the stock settings. If you do end up changing the gasket, change the bolts to the ARP product or even better, go for the ARP stud kit. You...

Hello our neighbours to the south. For the 3rd year, Montreal is hosting our annual Supra meet and we would like to invite you to a weekend of fun, rides, food and just plain Supra madness. Here is a link to the official page. Come on up and join us. Link to Official Page :icon_bigg...

SupraQuebec 3rd annual meet - Going South can mean a good thing -------------------------------------------------------------------------------------------- *** - July 13th through 15th - *** For those who missed the first 2 years of fun, SupraQuebec is back to bring you “ Montreal...

If that is rust I see over the rear wheel, you may want to strip the rear hatch and check for rust on the inside wheel well (under the tar pitch) as this is a common issue with Supras... you may just find that there is a big hole hiding under the panel and pitch in the well. I'm sure you'd hate...

Same here, been running an aftermarket pressure and temp unit from the original sender location using the aftermarket wire harness and have had no problems... The old rubber cap connection is still there tucked up out of the way doing absolutely nothing....

X2 Get an adapter to mate the two different threads and maybe even a "T" fitting so you can throw a Oil Temp sender in there as well...

Thanks for the great info once more... My 7m is getting some 0w30 this spring... it's finally getting warm here but the car won't be out before mid may with all the sand on these back roads... The real point of this message is concerning a new topic. I would like to hear more about your...

Great thread...:thumbup: While strolling around in Walmart (here it is north of Montreal, Quebec, Canada), I came across the GC on the shelf. It was something like $8.50CND so there may be another source for the 0W30 GC.:icon_bigg Edit by Jdub: Confirmation for you Canadian...

I took a different route... instead, I used an old map pocket, cut out a bit of it, some material, fiberglass, bondo, wood and primer and I get this for a 6.5 on the door... Testing shape Almost finished, The wooden inserts where the old speaker grill used to be are painted anodized red to...

I use something like this, it is a cap that fits over the end of the filter and has a 3/8 hole for an extension so you can turn the thing with a ratchet. There are different sizes for different filters so make sure you get the one for a Toyota filter. You can get to the filter from under the car...

You are right, Dirgle, the TSRM says 5 minutes of pressure after shutoff... Don't know where I got my number from... going to check the shop manual I have as it may be missing an update. Curious, would the "J" tube have any effect on the shut off pressure with the restricted end? Has someone...