Search results

I used a 7mge on a Jspec 7mtge to pass emmisions. I had swapped out the blown 7mge for a jspec 7mgte and saved the egr valve for when I needed to get emissions done. It bolted up fine and worked for passing emissions. Although I am not sure that they are exactly the same in how they are designed...

Your PM box is full wondering if you had any updates on the polish parts. Thanks, Craig

I would have to say check the 30amp fusable link in the engine fuse box. That doesnt really make any since though because you would end up having the 1.37 on the +batt of the ecu. But if could be that someone before you messed with the wiring for the ecu and ran the +batt to somewhere else. If...

The reason to bypass the clutch safety switch when using an upgraded clutch and pressure plate is that when the clutch is depressed it puts stress on the thrust bearings in the engine. The thrust bearings have no direct oiling or any direct oil pressure they are feed oil from bleed off from the...

I dont understand why a relay is needed for this. It should be as simple as connecting one wire from the clutch start switch to ground and connecting the other to the white wire from the Bee-r, then bypassing the clutch switch so you can still start the car. You should probably bypass the clutch...

http://www.supramania.com/forums/showthread.php?43167-oil-catch-can-install&highlight=catch+install I know he put a diagram and pictures in this thread somewhere.

I would search for some "catch can" threads on the forum to see how to correctly route the pvc system.

This(circled in red);

550's would be all you need, that is unless you have plans beyond the 57.

I've also considered this as the color to paint mine when I finally get around to painting it. I would love to see it on a MKIII. I think what Grimjack meant was when mixing paint there are certain amounts of certain colors to add along with certain metallics to mix into the paint. It gets...

Here's a few of mine. Sent from my DROIDX using Tapatalk

If you were to use your stock fuel pump wire to trigger a relay to the A1000 like previously stated, all you would need to do is break the stock fuel pump wire somewhere and wire each end into a switch.

I have used the ebay mufflers before, I personally like the sound of them. The one I used was a 3 inch inlet with a 4 inch out. I would have to dig to find one. I also used a mbc from ebay. I worked great for what it was. I think it was like 15 bucks. I don't know if I would trust the bov...

I am assuming by throw he means something along these lines. Obviously not this extreme, but something like this. A little slant towards the windshield at the top of the cowl. I would be alright with this if it was somewhat suttle and it looked like it belonged there. I think there might be...

So I am guessing we need something like this started, just add to it. 1. Scruggs86.5T 2. 3. 4. 5. 6. 7. 8. 9. 10.

That is exactly what I want. Just waiting on the 89+ version.

I would be in for one. I would definately like to see the design first though. I like the look of the raised cowl, but I only like it raised a little nothing extreme. Hope that makes sense. I have seen some that are raised too high and I just dont like the look of it. Also I dont really like...

Here ya go http://www.rs-r.com/store/pc/viewCategories.asp?idCategory=23

I'm using them, or was using them, on my N/A.