Search results

See my post (#442) in Tookwik's COP thread. I describe what I had to do on the wiring. My colors were like yours too. http://www.supramania.com/forums/showthread.php?39059-Tookwik-s-7M-C.O.P.-ignition-mod-w-stock-electronics...pics-and-writeup/page15

Be very careful prying it. You have a 90% chance of snapping that black plunger. I would reach from inside and just pull on the mechanism.

Is that removeable, or do you need to go beat some muthafukka's...?

Ordered 3M Dual Lock, studs for my wastegate, and removed my A-pillar covers in preparation for removing the dash. On my Trooper, however, I pulled the driver's door panel to find what was rattling behind it, and found that my speaker was blown, and the frame that it sits in was broken. So I...

I have a feeling that even a 1inch increase in diameter would require a shroud that would interfere with the hood. But all's well that ends well.

Sorry to hear about your luck. I was going to tell you that the only time my car ever shut off on me, was when a wire rubbed against the egr pipe, and kept blowing the efi fuse, and was going to suggest you check that area. But then I saw your last post and laughed. Not AT you, just the irony...

A big thanks to Tubbie, for getting a few parts for me: Brake line shield: And a TEMS unit. I just wanted the housing so that I could make a clean-looking switch unit out of it. 1/8" plastic sheet. And done. Just waiting on two switches to arrive.

Thanks. I've read your build too. Hope to get close to your power output with mine.

I think I recall IJ once posting about certain impellors having more tendency to cavitate, but i cant recall where i saw it.

Oops, brainfart.

I'm in the same boat- Have to take my dash out to put a new ac core, and heater core in. My dash has one long crack on it, and don't want to put it back in like that. I am going to purchase a replacement, but I still want to do something with the old one. I might try and recover it myself. I'm...

Efans? I would never want an efan. I ended up doing the same thing- Buying a brand new fan, as well as a brand new fan shroud.

PLX vac/ boost monitor system. Hopefully, the AFR system arrives monday.

Got my PLX vac/ boost system in today. Hopefully the AFR kit will come monday.

Yeah, If you're lucky then you can just slap a replacement turbo on, and run it. If you're unlucky, smaller bits of the compressor wheel made it through the intercooler and into your cylinders.

I've never heard of the DH61 being used with IS300 coils either.

And here i thought i was done spending money on the engine... Gonna have to do this.

I think you'd be fine without the shroud, until your oem type rad begins building blockage/ calcification at all, and you're in warmer temps. But at ~$75 for a new one, why would you risk overheating?

Are the boots easy to cut to proper length without screwing them up?

Lol. And ps again- How hard would it be to make the plate out of carbon fiber? I mean, its just a flat piece, with holes drilled out of it, right? Anyone up for trying that?