Search results

You just had to resque your friend from the shotgun weilding transfer truck driver didnt you.

also I imagine at some point sony suddenly dropped on the and we want it to be 3d too bomb

If people would look into it before shooting off at the developers you would see that it is NOT their fault it got delayed this time. The reason it got delayed was because sony put out a clause that all games released after November must be fully patched to work with the newest unhacked...

I packed my entire spare tire well with about 55kg of traction sand. I had toyo garrit's myself, I personally wouldnt reccomend studded tires the entire industry is getting away from them 90% of the studable tires will be low end shit. As for which tire to go for, it all depends on your budget...

Many things that could cause the noises over bumps, blown shocks, sway bar bushings, sway bar end links. End links and bushings are similar symptoms knocking sounds when going over bumps and uneven ground as the sway bar move with the suspension. You have to check for play in the end links and...

http://ezinearticles.com/?What-is-a-Front-Lip-and-Why-Would-You-Want-One?&id=2626800 ^ read that about the lips for an aerodynamic perspective. As for cooling I don't see how you think removing the lip will help, if anything a lip with a slant to it will direct more air through the front...

Would be nicer is the turbos were actually hooked up.

Sounds like what you need is a turbo :biggrinki

Looks like a knock off of the hks mid runner cast manifold.

Sounds oddly pulsy

Hate to be the first one to say this but you need spacers in a bad way to pull of those rims, what are they 22's?

I'd be interested in a set with amber on the outside and white on the inside to be used as daytime running lights.

http://cgi.ebay.ca/160489729811 On your knee's, you know the drill.

It's going to be a new plugin in flashchat called FlangeControl™ that allows you to access and control multiple parts departments from your central location.

Toyota parts advisor, saving for university to take psychology. Discounts are always good, though dosent pay the best (here anyway, damn you flange) but cant do much better in atlantic canada without some sort of college degree or knowing people. On the weekends I steal trees from the Omish.

Not to mention if its the pioneer 3 ways that I'm thinking of they sound like garbage no matter how well you have them in. At the futureshops around here the car audio guys strait avoid selling them because the stock speakers usually sound better than them.

Nice job but that wire panel really isn't the best idea to use, especially in a sealed box. A lot of potential for it to leak air or blow out. They usually just suggest drilling holes pulling the wires through and siliconing the holes. Just out of curiousity how far above the well does it...

I had to modify my rear boxes as my infinity's frame was just a hair too big. It involved cutting out some of the inside structural supports and trimming the inner mounting flange, then I filled the gap with urethane and trimmed it to fit properly. No modifying of the outside of the enclosure...

The reason for that is because the sensa trac setup is meant to work in a specific compression range, since you're changing it with the lowering springs naturally they are even shittier than usual. If you get the kyb's through napa they come with lifetime warranties. I doubt ebay will be the...

Spoken like a true mk3 owner.