Search results

You should make interior panels for MKIV Supras. They are discontinued, and there is definitely a market for them. Cheers.

I had no idea you've been through this many iterations. You planning on any 1/2 mile events anytime soon?

;)

Stock filter is not going to really flow what you want, either. Look into the longer 10 micron units. With those pumps, a -6 single feed to the rail will definitely flow 1000rwhp worth of fuel. Many people run dual -6 feeds to help regulate the pressure differences, but if the rail is -8 or...

What kind of fuel filter are you using with the 450 pump?

He just doesn't know. So what.

Excellent work on that cage.

Just enough ;)

I have been using the cheap green stuff for about seventeen years now. Nothing bad to report with yearly changes. Green stuff is also going in on my expensive rebuild, too. Same MK3 radiator since 2007 or so. Fans have done more to increase cooling than ANY one thing. I am using a...

Best to have a good working base tune. Your tuner or online support should be able to help.

They should hold a lot more than that. Make sure the block was sized to each piston hole, and if you have a torque plate, it's a GREAT idea. Get the pistons and rods balanced, correctly. You should never have to file anything off the pistons, even if they are sharp. If you want the car to...

Looked into these, what kit did you use?

I would actually go with the upgraded E85 Walbro pumps. The Bosch pumps are good pumps, but they aren't flowing as much. You should be fine with two Bosch 044 pumps ,however. Your R-154 may end up stripping 3rd gear during a good pull at 1,000+rwhp. There are gear upgrades, available.

I drove my Supra with an A1000 only, 13+ hours. Stopped only for gas, food. Roughly four hours running time, constant highway speed. In 95+ degree traffic and it managed just fine. You will need two of them for 1000+rwhp, anyway. I'm going to use a single Magnafuel 4303, as I did before...

Got the motor out, disconnected the transmission, removed clutch. Finally. Thanks to my wife :)

The one I got. http://www.ioportracing.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=33270&Category_Code=AP6270 The one you're asking about. http://www.ioportracing.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=83530&Category_Code=AP530 Friend of mine is an awesome welder but he...

Autopower Roll cage showed up for the 83.

get the OCD mod. i really like it on the 6466.

That's a very clean pretty car, sir. Weather has been good for cleaning and driving. Hopefully soon I'll get the Supra back out. 2.5" 45 degree welded on, 2.75" intercooler pipe connected, bunch of pie cuts welded, and connected to the old Greddy 3 row intercooler. Tested nitrous solenoids...

I'm not sure. Quoting and asking the initial poster of that information could get you more information. I simply replied in the affirmative, hoping for more analysis.