Search results

Well I got the 400lph in the supra :) Soldered the RC clips on and attached the Nissan tps to 2jzge harness Done the 12v fuel mod

This is going to be a super clean ride :) Excited about the brakes :D

And thats direct fit? What's you're work look like?

@Justin.Daniels - I could surf the salvage yard for one to send ya. What kinda price for the service? @ compton 74 Ouch $100? That's making a scratch built one? @supra mn - And yeah I got a fail safe gauge with AFM/boost looking for simple clean and functional.

I would like to have one pod in my steering coulum for boost/AFR. The a pillar pods are not what I want. I know VW and Mitsubishi have pods in column,how about for the mk3?

@IJ Sorry I misread your first post in the thread. I'll run a dedicated power wire for the relay and pump 10 gauge with 10 gauge ground and soldered connections with heat shrink. Btw sHould i run the FP wires on opposite side of the car so I don't pick up noise in the subwoofer?

Just curious about my options. The battery in front is what I want tho. I'm going to look for a battery and fused distribution block.

Is 6 gauge strong enough to use for moving the battery to the trunk? My battery is going to be small if I keep it in the front. Like 7 ¾ long by 8 tall and 7 wide with 450CCA Lights don't dim with bass. Its only 200w. When its maxed out its annoying. Can't see out of mirrors. Start bleeding...

Alright then! Thank you!

Alright I'll search for a "fused distribution block" BTW how do you figure out amp drawl on a fuel pump? I assume the lph and pressure have something to do with it and the 12vdc is a contrant. I'd like to know just to learn and know why. Thank you!

I should have added the relay to the picture. But I felt no one would be that ignorant to run power 24/7 to pump. @SC61 MK3 So just split the power from the big cable to amp and relay for FP and use a 60amp fuse for subwoofer/FP at battery. the subwoofer uses a 20 amp fuse built in so I...

Sharing the vaccum/boost signal with fpr and map bad? And I was reading on flying miata the the vaccum signal is best at the back or middle of intake. Is this true about signal quality on air pressure?

Lolz what a climax "you know what I mean ;)" I guess I could run seperate 10 gauge wires for pump. Just taking the interior apart sucks.

Lolz what a climax "you know what I mean ;)" I guess I could run seperate 10 gauge wires for pump. Just taking the interior apart sucks.

Bump for information from wise and knowledgeable members

Bump for information from wise and knowledgeable members

sigh :/ to bad i couldnt do it right once. it was good to see you supraguy@aol @ the supra/celica meet! to bad there was only one mk3 and 3 mk4 supras and a bunch of celicas and 4 mk2 supras hahaha

sigh :/ to bad i couldnt do it right once. it was good to see you supraguy@aol @ the supra meet! to bad there was only one mk3

about to finish my build and its down to vacuum lines and some wiring. my question is this MS paint picture accurate on how i should do my vacuum lines? I didnt know if there is anything wrong with feeding sensors and actuators with same hose. or add another hole (line) just for...

So i have a heavy power cable (1200watt rated) for a subwoofer that goes from engine compartment threw a 40amp maxx fuse then under the carpet to trunk to a 200 watt subwoofer. I have a 400lph walbro that i was going to power from off that same 1200 watt rated cable. So i was thinking about the...