Search results

They put it on a charger and said it was fine I'll try my other one and see if that works any other ideas

Well I tested the alternator I had and it failed so I got one from autozone and it worked but wouldent charge in the car the fuse in the engine bay is good and has continuity

Ok I've put on 3 alternators so face and can't get any charge out of them the stock one Finaly died and the car drove fine before it died now I can't seem to get them to work what am I doing wrong

ok first off i know a lot of people are gonna say get a one pc. drive shaft but im broke right now and just want the bad bearing switched. so i found out my center support was bad and decided to buy a new one i got prices and they were more then i had so i got the part number on line and ordered...

I read that when you turn the key the cel will flash for the engine codes but mine doesn't flash at all

No the engine light comes on when driving but nothing comes up when you turn the key on it doesn't flash any codes I found some vacume leaks and fixed them but still rich and lean issue and I haven't done anything so I don't know what kind of fuel set up it has I just seen that the injectors...

Ok I just bought a mk3 supra that I thought was a factory turbo car with mods come to find out its a NA car with a turbo swap I don't know if the engine has internal upgrades. The car is running Lexus afm with 2jz ignition coils and step one colder plugs with I'm guessing 550 injectors. No with...

I know I'm gonna get off topic from the post but how does A/F ratio fluctuate when driving and idling? I haven't got to actually get on it yet because the clutch was fryed but going down the road it's at like 17 and about the same at idle but when I got a little boost it went to 13ish which is...

Thanks a lot guys got it out and ready for the new clutch and flywheel tomorrow are there any specifics to installing these I should know about or just torque to spec and install like removal?

So I have it unbolted all 6 are out but they won't separate ??

Since I'm replacing everything do I still have to put a match mark on the flywheel?

Ok thanks I didn't know you had to take the clutch off first I've never taken a Manuel trans out before and I couldent find much about the process.

ok so ive tryed finding info on how to change a clutch in a mk3 with a 7m turbo and i havent found much so i was wondering if anyone had a break down on how to do it. i have all the bellhousing bolts and starter bolts out i have the slave and fork out and all the wires out and i cant get the...