Search results

Anyone? :)

Thanks everyone! I hope this thread helps out others like me learning the 1jz motors!

I found the wire for my water temp... 1.it was cut and disconected.... when i connect this wire the gauge goes strait to Hot and keeps rising as much as possible. 2. another wire was added but also cut headed towards the firewall. Where do i connect this line from the single wire on the dash...

Is the mazda one a direct screw in like driftmotion or does it use banjo fitting and banjo bolts like stock? just wondering before i go and pick it up and it doesnt look right thanks for all your help!! Matt'!~

http://i33.photobucket.com/albums/d58/warriorrider88/ik1.jpg is this the ig1 your are refering to? someone called it a ik1... I do have a supra harness, so if this is from the wrong one can someone point me in the right direction with a picture of the plug and its location! thanks

What one is the ig1? i know of the m1,b1,b2,b3 ect but no ig1 do you happen to have a picture>? Matt'!~

Can u post some pictures please.

Pictures please!

this one in green?

I understand about putting the new high pressure line(replacing the line with arrows) Also that this line goes to the power steering cooler But where does the other end of this power steering cooler line run to? anything of your help would help me lots thanks! Matt pictures help a lot...

Where is the temp and oil sensor location for my 1jz? I accuired a 1jz already "wired" and my oil pressure gauge and my coolant gauge do not work. any info would greatly help! Thanks Matt'!~

Still have a stock fuel pressure regulator on your fuel rail?

Problem fixed!!! There was no fuel pressure regulator! Just a -6an fitting on the rail connected to the fuel line!! Thanks for all who helped!

Problem fixed!!! There was no fuel pressure regulator! Just a -6an fitting on the rail connected to the fuel line!! Thanks for all who helped!

lol not a problem, i know my 7m motors lol!

this is for a 1jzgte?? :-?

ECU is fine, vac lines are fine.... Think i figured something out... Today I checked coils, and used fingernail polish on some minor cracks and also checked the ecu once more... then I decided to kink the return line, while kinking the return line i can rev the car and it acts like a...

ever figure out the problem> I have a similar problem!

Bump I would like to know also!

OK here is what I have done I have replaced the TPS and set it corectly. I have replaced the Map sensor I have checked for vaccume leaks The car will start and run. When i touch the gas the car will studder and die. If I unplug the map sensor from the plug I can rev the car I...