OK here is what I have done
I have replaced the TPS and set it corectly.
I have replaced the Map sensor
I have checked for vaccume leaks
The car will start and run.
When i touch the gas the car will studder and die.
If I unplug the map sensor from the plug I can rev the car
I need to know what else I can check... and how to test parts to make sure they are correct.
Thanks
Matt'!~
PROBLEM FIXED!!!
THERE WAS NO FUEL PRESSURE REGULATOR! JUST A -6AN FITTING ON THE RAIL CONNECTED TO THE FUEL LINE!!
THANKS FOR ALL WHO HELPED!
I have replaced the TPS and set it corectly.
I have replaced the Map sensor
I have checked for vaccume leaks
The car will start and run.
When i touch the gas the car will studder and die.
If I unplug the map sensor from the plug I can rev the car
I need to know what else I can check... and how to test parts to make sure they are correct.
Thanks
Matt'!~
PROBLEM FIXED!!!
THERE WAS NO FUEL PRESSURE REGULATOR! JUST A -6AN FITTING ON THE RAIL CONNECTED TO THE FUEL LINE!!
THANKS FOR ALL WHO HELPED!
Last edited: