Search results

this one: http://cgi.ebay.com/ebaymotors/95-99-240SX-S15-S14-SR20DET-RACING-ALUMINUM-RADIATOR_W0QQcmdZViewItemQQcategoryZ33742QQihZ009QQitemZ190158749739QQrdZ1QQsspagenameZWD1V looks to be the same yet cheaper?

Well i bought a nissan rad(not installed yet), I thinks it's this one: http://cgi.ebay.com/ebaymotors/95-96-NISSAN-240SX-S14-ALUMINUM-RADIATOR-SR20DET-97-98_W0QQcmdZViewItemQQcategoryZ33602QQihZ017QQitemZ270180366658QQrdZ1QQsspagenameZWDVW it's about stock mk3 rad size, slightly thicker The...

No it won't fit man, just look at how tight the stock mk3 rad fits, only a few mm's space the mk4 rad is allmost 9 cm wider= 3.5 inch

the mk4 rad is about 750 mm wide, the mk3 one is about 660 mm :)

the mk4 rad is too wide for the mk3

I think it looks great, especially the tank :)

what's Tony's website adress again? :)

and get the flywheel and pressureplate balanced!

this indeed is a mistake by fidanza, as they did before(wrong bolt holes, center-bore) when you're lucky you get a good flywheel from fidanza check my set: at the stock flywheel the measurement is larger and the plate fits and guys, please learn the metric values from the marking...

Well this looks like the same issue i had pimptrizkit: why didn't you notice the rubbing before installing the set?

i think fidanza just had a bad batch again when i got my fidanza+clutchmasters stage 3 set the disc would also rub the inside of the flywheel so had some material machined away

ok just checked, the white 2 wire pps connector leaves the harness at the same place as where the igniter wires do You can see the wires go to the valve on the rack If your car doesnt have pps it will be taped to the harness :)

i mean the electric connector to the valve on the steering rack If pps fails steering will be heavier

maybe a loose pps connector, f.e the one close to the intake manifold

Well since a gallon fuel is only $8.20 here; who cares:icon_lol:

^the gauges at the bottom of the page do!

aren't they just prosport gauges, but rebadged?

Where's the wideband a/f gauge?:)

Poodles is saying you can take the ring gear from the torsen 4.1 and put it in the stock mk3 clutch diff or get the n/a clutch diff which is 4.3

are you denying certain feelings here?:)