Recent content by JStoked

Is that grumpy old IJ around still!

Well shit I'm back around.got bored with the fb bs.

Is your cel light coming on?

I replaced the coil packs with new ones thinking it was the same thing. I had hks plugs in it to start out with. Buy it keeps fouling plugs out no matter what I do with the safc.

I haven't posted here in a while. But I recently installed my 1jzgte in my supra and it's not going so well. What all is done I'm upswing a aristo 2jzgte ecu, with aristo 440 injectors, precision 6262 turbo, 40 mil waste gate. I have ngk plugs gapped to 22. Now my prob. The car is not running...

Ok today I put 440 aresto injectors in my 1jz fuel rail. Once I got everything back together I noticed that the plates that hold the injectors in place was about a 1/16 of a inch to tall. So do I need to grind the towers that the plates bolt into down a 1/16 or did I do something wrong?

I'm posting this as a friend the car is a 87 7mgte that has been bored 20 over, it has a Hks intake filter and that is it. The car is hitting fuel cut. I thought it was the waste gate actuator. So sent him another one. The car is still hitting fuel cut. When the car is cold it boost's fine. But...

Ok im not new here but I haven't posted in awhile so here we go. So here is my set up that will lead to my question. I'm going to be doing a 1j swap into my 91 ma70. The set up is stock twins, usdm 2jzgt ecu, usdm 2jzgte 550 injectiors, afpr and fuel lines. So all that said. Can I use my 7mgte...

Yep what jj said. These cars don't like to just sit.

^ plus one to that. More air and less fuel means LEAN!!! Not rich. If you want to put the that Lexus Maf on you will need. A safc, afrp, bigger intectors, afr gauge, and tuning. If you just slap that Lexus Maf on well let's say its not a good idea.

Looking at buying one of these motors for cheap. So my question is can they make any hp? I have done some research and I understand that they like to spin rod bearings and only put out 210 hp. So any info on to or not to buy this motor would be great. Thanks.

Well this supra I have just got going has really bad brakes ( no brakes!!). I went to bleed them to see if I could get them to some what work. Well the front to calipers the bleeder nipples are broke the fuck off (yet another sign the po couldn't do regular mantinace) so my question is that I...

Also it could be bad wires at the cps. Have someone crank it while you wiggle the wire harness at the cps.

Did you check your tps to make sure it was up to spec?

Lol it's all good man. Thank you for trying to help out. And yes jj I'm working on checking all that and thank you very much for your info.