Aresto 440 in the 1jz fuel rail

[JStoked]

Ok today I put 440 aresto injectors in my 1jz fuel rail. Once I got everything back together I noticed that the plates that hold the injectors in place was about a 1/16 of a inch to tall. So do I need to grind the towers that the plates bolt into down a 1/16 or did I do something wrong?

 

[hvyman]

Are the injectors in all the way?

 

[f00g00]

The 440's are the same size as the 370's, did you put petrolatum on the O ring to help seat and seal them? Did you pull the rail to do it or just drop them in? there is a seal on the bottom for the pintle cap that might have come off the 370's and stayed in the rail and might be jamming it up.