Search results

Now I just need some turn signals bonus shot of Staticpat's new FD. LOL patrick has come along way since redneck rodknock fixing to buying a nice car.

Since I finished my rebuild I am working with a local fabrication shop to help design and build a nice cold air intake setup for the N/A guys. We have been kicking around a few ideas an want to know what you guys might want. Either an aluminum upper tube to the afm then another tube through...

Ok so here is the story. I finally finished the engine rebuild on the N/A, it is a 89 auto w/ no tems, abs, or other options. I put the motor back in last night and went to put the interior back together today and could not find a the connector harness on the chassis by the ecu. It is harness...

I just read the head shaving thread and searched around a bit, but was wondering what you guys thought about it all. I just picked up my motor from the machine shop and they took about 0.014 off of the the head and block combined. I know that stock is 1.37mm and to keep stock compression I...

search these item # at sears.com 9 Piece SAE X-Beam Combination Ratcheting Wrench Set Item #: 00960240000 12 piece Metric X-Beam Combination Ratcheting Wrench Set Item #: 00960239000 10 Piece Metric XL Ratcheting Combination Wrench Set with Roll Pouch Item #: 00960214000 7...

first off what does everyone do with the iat sensor? And also saved any one have the info in the stickies saved anywhere because most of the links are dead.

are there any differences between A430E And A3040LE from the supra and the cressida? i searched but found nothing I am getting the motor from a cressida and can get the trans cheap too as a spare if it will work in the supra.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=MSD%2D2225&N=700+1004+115&autoview=sku how does it compare to the walbro? And can i use it as a boosting pump in addition to the stock one? i have a 57 trim and going for about 400hp is this a good choice or should i just get a...

http://store.survivalmotorsports.com/probepr14490.html I didntknow that they were carried by anyone else, are these the same one that we got made?

http://store.summitracing.com/partdetail.asp?autofilter=1&part=WLK%2D31942&N=700+4294923429+4294820497+115&autoview=sku I am not able to measure the bolt hole spacing of the down pipe but it seem about right. Can someone verify?

I am starting to assemble my motor and after the rebuild (rod knock) with all kinds of forged goodies. And I was reading that the Group A's use the heavy N/A block with out the oil squirters because they used forged pistons an they were not needed. I believe my rod Knock was caused by 3 of the...

http://cgi.ebay.com/ebaymotors/Toyota-Supra-Toyota-Supra-7MGTE-3TC_W0QQcmdZViewItemQQcategoryZ6447QQihZ010QQitemZ200153835316QQrdZ1QQsspagenameZWDVWmore best part is his response to the question lol. "The whole motor is 7mgte, with all descriptions that i posted, but i never had a chance...

whats up all I have been a member for a while, I know the Birmingham people, staticpat (my roommate) and met a bunch of people at the AL dyno meet. I bought mk3jesse's car and swapped the motor in. and got it running and brought it back to alaslama.