Recent content by cpederson

Ya it's just set a fixed dwell

I believe it's 2.5ms

Car is 1jz, pt6265, rc1200's, walbro 450, e85, ngk iridiums gapped at .024, 1zz coils, haltech ps2000. Now the car will pull fine sometimes but mostly it will cut/lose power at 5000rpm to 6000rpm then power with come back like someone hit the Nos button. I have no idea what it could be, I've...

i have a 6265 with a .81 ar on e85, 1200cc, twin walbros, on 17lb street tune tuned on haltech ps2000. car made 480whp/456tq.

I was told you can't run a fcd with a safc2? It just cuts for a slit second then power comes back on. Text me I'll send u a vid 414-916-1185

Bump

I have 440's comming in the mail, and yes stock map sensor, ecu and stock injectors.

First off this is what I have done to my car -1jz single 6265 -new coils(no cracks) -new plugs bkr7e gapped at .027 -13lbs of boost -stock injectors -walbro255 -safc2 tuned. Now for the problem, if I Try to run any more than 13 lbs of boost it will cut like its blowing spark out...

heres mine, billet 6265 1jz

plug gap and figure out that timming issue

im looking to fit 17x9 front with 25mm offset and a 245/40/17 tire and a 17x9.5 rear with 30mm off set and 275/40/17 tire on eibach springs.. how will this fit on a mk3 thanks corey

Anyone had any experience with these cams and shimming them? I have stock 1jz cams that have had the base circle ground down giving my cams more lift and duration. Reason I'm asking is that I am going to shim them and I have a huge gap between the cam and shim that's there. Idk if they make a...

this wouldnt be to hard to make either.

im thinking between $75-$150 it all depends on how many i make, how extensive i make'm and if its painted or anodized or powder coated.

Im talking anything.. Brackets, fuel rails, flanges,