Search results

  1. C

    1jz cutting at 5000rpm after 1zz coil install.

    Ya it's just set a fixed dwell
  2. C

    1jz cutting at 5000rpm after 1zz coil install.

    I believe it's 2.5ms
  3. C

    1jz cutting at 5000rpm after 1zz coil install.

    Car is 1jz, pt6265, rc1200's, walbro 450, e85, ngk iridiums gapped at .024, 1zz coils, haltech ps2000. Now the car will pull fine sometimes but mostly it will cut/lose power at 5000rpm to 6000rpm then power with come back like someone hit the Nos button. I have no idea what it could be, I've...
  4. C

    6266

    i have a 6265 with a .81 ar on e85, 1200cc, twin walbros, on 17lb street tune tuned on haltech ps2000. car made 480whp/456tq.
  5. C

    1jz single break up.

    I was told you can't run a fcd with a safc2? It just cuts for a slit second then power comes back on. Text me I'll send u a vid 414-916-1185
  6. C

    1jz single break up.

    Bump
  7. C

    1jz single break up.

    I have 440's comming in the mail, and yes stock map sensor, ecu and stock injectors.
  8. C

    1jz single break up.

    First off this is what I have done to my car -1jz single 6265 -new coils(no cracks) -new plugs bkr7e gapped at .027 -13lbs of boost -stock injectors -walbro255 -safc2 tuned. Now for the problem, if I Try to run any more than 13 lbs of boost it will cut like its blowing spark out...
  9. C

    ***The Burgandy Supras Thread***

    heres mine, billet 6265 1jz
  10. C

    1jz tuning issue

    plug gap and figure out that timming issue
  11. C

    how will these wheels fit?

    im looking to fit 17x9 front with 25mm offset and a 245/40/17 tire and a 17x9.5 rear with 30mm off set and 275/40/17 tire on eibach springs.. how will this fit on a mk3 thanks corey
  12. C

    Reduced base circle ground cams.

    Anyone had any experience with these cams and shimming them? I have stock 1jz cams that have had the base circle ground down giving my cams more lift and duration. Reason I'm asking is that I am going to shim them and I have a huge gap between the cam and shim that's there. Idk if they make a...
  13. C

    anyone interested in cnc'd billet parts? (valve covers, block off plates,coil covers)

    this wouldnt be to hard to make either.
  14. C

    anyone interested in cnc'd billet parts? (valve covers, block off plates,coil covers)

    im thinking between $75-$150 it all depends on how many i make, how extensive i make'm and if its painted or anodized or powder coated.
  15. C

    anyone interested in cnc'd billet parts? (valve covers, block off plates,coil covers)

    Im talking anything.. Brackets, fuel rails, flanges,
  16. C

    anyone interested in cnc'd billet parts? (valve covers, block off plates,coil covers)

    hey, im throwing around teh idea of full cnc'd billet valve covers block off plates, or coil pack covers or any other parts? Reason im asking is that i have the resources and machines to do this, I work at a high precision machine shop and wanna start making parts that people actually want...
  17. C

    any one use this turbo? or have ideas for 600hp turbo?

    1jz ,e85, twin walbros, and either mapecu2 or haltech, 264 cams,
  18. C

    any one use this turbo? or have ideas for 600hp turbo?

    i was looking at buying this turbo http://www.ebay.com/itm/Borg-Warner-Turbo-S300-S366-91-79-Extended-Tip-/220790098939?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item33681d8bfb#ht_500wt_1054. has any one had any experience with it? also what do you guys recommend for a 600hp range turbo?
  19. C

    best fuel pump set up for 600hp?

    two 255 intanks? I've herd that's not enough for e85 and 700hp?
  20. C

    best fuel pump set up for 600hp?

    Any othe ideas?
Top Bottom