What did you do to your supra today? Pics

[Chris_87_Turbo]

You should be able to reuse the cometic gasket but you may have to use a spray sealant or something to help it seal. I've read somewhere before it always be done though.

Chris


Sent from my iPhone using Tapatalk

 

[SuprA70]

Please tell me you have a write up on this and where to get parts I'd like to do something like this as I made the same mistake and put my boost gauge where the cig lighter was lol.

Here are the parts I used, got everything from Amazon.

ABS plastic project box (they offer different sizes for the box to suit your application):
http://www.amazon.com/gp/product/B00INGRK74/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1

Dual USB socket:
http://www.amazon.com/gp/product/B0082CXEI8/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1

12V socket:
http://www.amazon.com/gp/product/B001U4ZZPK/ref=oh_details_o02_s00_i02?ie=UTF8&psc=1

Rocker toggle switch (optional):
http://www.amazon.com/dp/B00KD64MAK/ref=twister_B00KD64MBE

You will need a 29mm hole saw for the sockets and a 19mm for the toggle switch if you decide to use one (it's wired to work as a main power on/off for this thing; just something to fill out the rest of the box I used, functional but not necessary).

http://www.amazon.com/DEWALT-D18001...3923096&sr=1-1-catcorr&keywords=29mm+hole+saw

I basically reused the connector from the factory cigarette lighter and just extended the +/- wires from it to power this.

 

[ImperfectSupra]

I thought I was bad ass because my ac was blowing super cold after getting a hold of 2 cansnof r12. Ac worked fine untilbi revved the shit out the car and the compressor cluth shorted out,

Finally replaced it with a new unit. The old unit was really terrible. It had fall apart at the magnet part, and the whole unit had yearsbof crud built up.

 

[ImperfectSupra]

I thought I was bad ass because my ac was blowing super cold after getting a hold of 2 cansnof r12. Ac worked fine untilbi revved the shit out the car and the compressor cluth shorted out,

Finally replaced it with a new unit. The old unit was really terrible. It had fall apart at the magnet part, and the whole unit had yearsbof crud built up.

 

[Doat]

Here are the parts I used, got everything from Amazon.

ABS plastic project box (they offer different sizes for the box to suit your application):
http://www.amazon.com/gp/product/B00INGRK74/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1

Dual USB socket:
http://www.amazon.com/gp/product/B0082CXEI8/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1

12V socket:
http://www.amazon.com/gp/product/B001U4ZZPK/ref=oh_details_o02_s00_i02?ie=UTF8&psc=1

Rocker toggle switch (optional):
http://www.amazon.com/dp/B00KD64MAK/ref=twister_B00KD64MBE

You will need a 29mm hole saw for the sockets and a 19mm for the toggle switch if you decide to use one (it's wired to work as a main power on/off for this thing; just something to fill out the rest of the box I used, functional but not necessary).

http://www.amazon.com/DEWALT-D18001...3923096&sr=1-1-catcorr&keywords=29mm+hole+saw

I basically reused the connector from the factory cigarette lighter and just extended the +/- wires from it to power this.

I love you

 

[Janch]

Did you deck the head AND block when you installed the cometic?

i did only head. i couldnt take out block to do that. from head they took 0,2mm off

 

[Doat]

Went to a local meet with a dyno and signed up car put down 273hp apparently that is a mustang dyno and those usually read 10% lower I need to go back to the shop I originally dynoed my car and see what it puts down I am think about 280hp.
https://www.youtube.com/watch?v=n__W4U8_VNI

 

[gsxr141]

did more tuning..... ugh!!!!

 

[jdmfreak]

did more tuning..... ugh!!!!

See if you had gone megasquirt this would have said

did more tuning.... !!!!

 

[suprajztwenty]

^^^^^nailed it! megasquirt+tunerstudio FTMFW!!!

today i rigged up a ghetto undertray for my 4+hr drive to houston tomorrow (i mean in 3 more hours)

 

[Doat]

On my way home following a friend in his GS300 I smoked him then after that run a civic SI with HIDs sped up and lined up next to me, we both downshifted and we stayed neck and neck until I hit full boost then he was gone with the wind. I love this 7M once it gets going it's like a freight train.

 

[gsxr141]

See if you had gone megasquirt this would have said

lol.

getting ready to change my plugs..... hopefully the engine has cooled down since last night.................lol.

 

[A-to-the-J]

Not today. But since my car got pushed back a week... I decided to do some things... Found a new heater valve.. Replaced my fan clutch.. Got the right hub centric rings and this...

Bumper is still temporary

Sent from my SAMSUNG-SM-G900A using Tapatalk 4

 

[Grandavi]

Drive on highway at 110 kph for 5 hours. 10.5 l/100 km (22 mpg)..
Not sure if I should consider this good... Lol

What's best RPM for fuel economy... That was at 2850 rpm...

Dropped my car off for alignment... Shakes at 100-130 kph. (60-75 mph)
Could be wheel balance... Not sure, but it hasn't been aligned since I put the HSD coilovers on.

 

[yhatzee89]

Went and picked up these for $400

 

[Doat]

I hate you now go back to being a girl

 

[yhatzee89]

Sorry bro, if I was a girl I'd be a lesbian

 

[Doat]

*sigh* I just can't win anywhere

 

[atmperformance]

Sorry bro, if I was a girl I'd be a lesbian

sometimes I think i am one.

 

[yhatzee89]

I tell my gf that I'm a lesbian trapped in a mans body all the time. (She isn't complaining)

What would be the best way to polish the lip and face of those rims? I spent like 20min last night with a powerball and a tub of mothers metal polish and it didn't do much :/