Torquing Crank Pulley Bolt on an Auto

[JDMMA70]

Need help with torquing the crank pulley on an Automatic supra. All searches lead me to how to do it on a 5spd. So that won't help me hah.

Thanks for reading
~JDMMA70

 

[IJ.]

Engine in the car or on a stand?

 

[hvyman]

you jam a screw driver in the ring gear for the starter or get a chain wrench and hold it inpalce. i like the chain wrench better and there like 25 bux at harbor frieght but dont get the one that you attach to a beaker bar its one link to short i think the actual one fits.

 

[JDMMA70]

Engine is in the car already

 

[IJ.]

Screwdriver in the ring gear it is then

 

[JDMMA70]

Screwdriver in the ring gear it is then

Thanks IJ, call me stupid but im looking at the TSRM at the Starter looking for the ring gear. Is it under a different name perhaps, im looking for it so I know where to jam the screw driver.


Thanks
~JDMMA70

 

[IJ.]

You'll need to remove the dust cover on the front of the bellhousing to get access from underneath.

Get a friend to use a BIG screwdriver against a tooth and the bottom of the block while you torque it down. (4th pic)

 

[JDMMA70]

Thanks a bunch IJ


~JDMMA70

 

[IJ.]

Don't forget Hvy's contribution

 

[JDMMA70]

Oops thanks hvyman for your contribution hard to see on my sidekick.

~JDMMA70

 

[hvyman]

thanks to the both of you:icon_razz