idle

So, guys, I hate my first post to be crying for help, but after a month or two of searching and replacing things I can't figure out the issue. When I bought my Supra in Feb. of 2012 it had a BHG and rod knock. No problem, I bought a JDM engine and had (supposedly) a reputable shop swap 'em out...

I'm new to the supra game I just bought this 89 7mgte a couple months ago from an older man probably in his 50s he says there's a 3 year old jasper engine in it and a 1 year old ct26 everything looks fresh and it ran good. Then I take it home and the first time I lay into the pedal the radiator...

I had been fighting with getting my TPS set correctly for the past few days and last night I bought an analog multimeter and finally got it dialed in. I first set the throttle stop screw so that the throttle gap was 0.0015'', I then slowly rotated the TPS until it deflected and tightened it...

I've got an 86.5 N/A Supra, head gasket has been done, car just rolled over 90k miles, and I'm at witts end trying to figure out why it wont run, first Parts replaced searching for the problem: Fuel pump Fuel filter ECM Symptoms: I went to the car wash a couple weeks ago when it...

Hey guys I have a couple issues going on with my supra post rebuild. Any help from the superstars on this site would be greatly appreciated. First off mods list. 1500 Miles on full rebuild. 7mgte Block bored with head for Cometic MHG ARP Bolts Probe .40 over Pistons AEM AFPR ARP Internal...

Well I had recently bought my supra and when you turned it on it idled at 2500 rpms, turned out the throttle cable had been broken so I replaced it and now it idles at 1500. How can I get it to set at a comfortable idle where it doesn't kill my gas, I'm thinking 750rpm. And the winning sound I...

Another day another problem, I still love 'er though :p My car has developed a burning oil problem ever since I finished my headgasket job. So first I had the head cleaned up and shaved at a machine shop and also got them to install new valve stem seals that I ordered from driftmotion. One of...

BACKGROUND; I have had an 88 Mk3 supra in my garage for 4yrs. I blew out the original engine which was a 7MGE. I replaced it with a 2JZGE from a Lexus SC300. I finally got the thing to start, but.... It surges. PROBLEM; So, it surges at idle. I drove it to the end of the block and back (.5...

Hi everyone, My 7MGE-into-4Runner swap is about 99% complete. I've had the pleasure of driving it around for the past week. My current problem is the Idle. At first it was extremely high. We figured out that it was the Idle Air Control Valve (IACV). After replacing the IACV, Cleaning the...