Search results

Since the car is parked for the winter i decided it was time to check valve lash. I've got all the specs and procedure down but im still fiddling with this feeler gauge. Can anyone tell me if im supposed to base my measurements on the largest blade i can fit between the shim and cam lobe? Im...

I keep springing a leak where the turbo's coolant return line enters the water pump. The stock nipple on the water pump is slightly wider than those located on the upper water neck. 6AN (what im using) is slightly too small and 8AN is to large. I softened up the 6AN rubber with a heat gun and...

Ok, first things first. This is more of thread to help me wrap my mind around what could be causing the listed problems. Im taking more of a you tune while I observe and learn approach. The car has been briefly tuned during its first session but is experiencing some issues. I'd like to get...

I know this has been touched on in other threads but they dont seem to apply to my situation. So here goes: First of all this is a swap into a mz21 soarer so there isnt a yellow connector like in ma70's. I only seem to have one yellow w/ black stripe wire coming off the female side of the IG1...

For the E-01's rpm signal, can i just wire it to the rpm signal for the tach. Or is there any particular reason why greddy suggests wiring it to the ecu's rpm signal? I'm assuming that #18 pin on the white rectangle connector in the following link is what im after...

Im running a DynoTune A/F monitor with my lc-1 which means that i will be utilizing both analog outputs for signal to EMU and signal to monitor. Is there any harm in me "t-ing" off the narrowband simulation wire and running that to the stock ecu o2 wire? Or should i reinstall the stock...

I need a part number for a toyota 2 pin temperature sensor connector. This is the green connector found on the water neck.

Alright so after trying to make sense of the infamous http://supraforums.com/forum/showthread.php?t=170792&highlight=resistor+wiring thread, I went ahead and gave it a try. Well, after i got everything wired up the portion of the setup where the black injector wires from the ecu are wired to the...

All i need to know is which color wires from the 7m engine harness correspond to each color terminal on the resistor? Black/orange to ?, red to ?, yellow to ?, black to ?

A pat on the back goes to whoever can tell me what this thing is?Came off my 1j

I plan on running a 4 1/2" x 11" x 2" core coil cooler on my 1jz. Would anyone recommend a different size to optimize cooling and oil pressure? Also, would using 10AN lines create to much of a pressure drop.. Sorry to keep everything brief, im in a hurry. :icon_mad:

I'm looking into installing a wideband o2 to use in conjunction with my Emanage Ultimate. I dont need anything over the top. Something that can be used along side the stock narrowband or offers a "simulate" function. I'll be using this in my summer daily driver, so a nice compact display or an...

I delicately took off my exhaust housing but still managed to get some tiny nicks in the wheel. The turbo had been freshly balanced when i received it. My question is how little is too much. Going by the pictures, should I just play it safe and have er' rebalanced...

I plan on getting rid of the stock oil cooler/filter mount and bolt my sandwich plate and filter directly to the block. Is there any particular 3/4 - 16 bolt that people are using? Possibly from another toyota model,etc. I've also considered using something like this...

Anyone have any experiences with these injectors? Heard anything through the grape vine.... Re-badged?

Is there some secret to get the damn thing off? I've got all the bolts, peripheral mounts, vacuum and coolant lines disconnected. The manifold is loose but i cant get it back quite far enough to clear the studs. Anyone who's got this thing off care to throw their $0.02 at this post?

What gets plugged into the circled fittings? Wanna get it all figured out before i start ripping everything apart! In addition, some of the manifolds I've seen have a tab near the throttle body and some don't. Im assuming this tab is for the throttle cable? Any help would be appreciated...

Getting all the plumbing figured out for my single swap... Is there a recommended AN size for coolant lines? Haven't been able to find a whole lot of info but the general consensus seems to be a 6AN line?

While taking the twins out this temp. sensor fell apart in my hand.. So i need to replace it! Anybody have a part number or know of another compatible sensor? Maybe a vendor can get a hold of one.. Or if someone out there has a spare by chance? From a jza70 if that makes any difference? The...

Just found a lil surprise in my car, a blitz access ecu. But, i've already picked up a emanage ultimate with all the fancy goodies to go with.. So i may be looking to sell the blitz ecu... So my question is, what's it worth?