Search results

here are the results of my dyno pull on nov.2nd 2008 mods- ct-26 50 trim, 3 inch exhaust, larger spearco style i/c w/ 2.5 inch piping, 550s, walbro, afpr, maft pro speed density, mbc @ 18psi, weapon r CAI, snow performance meth kit. these #s are on pump gas and there is much more...

Okay so heres what happened me and my buddy Shane (neednewtires) and his dad where on the way to the Kyana Supras Fall Meet Nov. 2nd 2008 in jeffersonville indiana from cinci. just before i had to stop and get fuel we i say and Audi RS-4 and asked shane if he thought it would run me. Shane said...

Ok so first off let me say that very few of the maft pro links in the maft pro archive are working so i have to post instead of reading and figuring out for myself. So anywho i have Maft pro version 5.0 speed density with boost controll, my mods are 50 trim ct-26, bigger spearco i/c, 2.5 inch...

i have a 89 turbo and my widows won't roll up or down nor will my locks work w/o BOTH doors open. i have checked the wiring going into and inside both doors and everything looks good. I can figure this out myself but i thought i would see if anyone has run into this before and could save me the...

i just bought some apexi lowing spring and bilstein struts, my question is with the lowering springs what levl should i put my bisteins @ if i just want the car to be out of 4x4 mode and not scrape on everything? i think i should leave the bilsteins on the hightest level but would apriciate any...

new time for me 60- 2.0809 330-5.6759 1/8- 8.5970 1/4- 13.2101 mph- 106.60 mods- intake, 3inch turbo back, 50 trim ct @ 14psi, 2.5 inch hard pipes spearco style i/c, STREET TIRES

i installed my maft and wired everything up correctly. the car started but ould die when i gave it throttle. maft is blinking code for no maf signal so thinking the used 3inch maf is bad i buy a new one, still the same thing. there is continuity through all the maf wires and both maf ohm out to...

anyone who has made an intercooler block off plate have a template? i would like to make a block off plate and thought it would be nice if someone already had a template made that they could transfer to paper and send to me. if someone has one i will pay for shipping and compensate $ for your...

anyone know these off hand? some one asked me and i have a stock 1jz intercooler but not here it is in storage. i know it is 2.5 inches thick. thanks -Zac

okay, i'm on my way home from work today in the left lane of the highway. the speed limit is 65 bu traffic is usually going 75 in the fast lane. there is a red prelude in front of me with a loud bumble bee souning exhaust going 60!! so i'm catching up fast and getting about 2 cars behind him...

if you run maft basic on a 89+ supra that has a hac sensor inside the ecu what will happen if you go into high altitude like 1mile or more form a couple 100 feet above sea level? does the ecu compensate or will you run really rich untill you re-tune? Could you just set it back to base and run...

hey guys i just wanted some input. I run 13.698 @ 101.5 w/ 2.00 60 with a internally stock 7mgte, ct-26 50 trim, full exhaust, intake, and large fmic with 2.25 inch piping @ 10psi on 245/50/16 street tires on mk4 n/a wheels. i am in the process of going ffim with a 1jz intercooler and 2.5 inch...

I have a modified ff stock manifold that i'm getting ready to put on but i need a throttle cable for it. the cable has to be about a 12 inches longer to work. i anyone knows were i could sorce one or has a way to modify the stock one it would be greatly appriciated. thanks _Zac

Anyone got any pics of a maft install? i want to see where you splice into the wires b/c the manual doesn't have pics and some mounting options, i was thinking about the center console or inside the glove box bolted to the side or any other suggestions anyone has. thanks -Zac

i took my 89 supra t to the track saturday. i ran a 13.698 @ 101.5 my 60 foot was 2.088. i just wanted to post my time to see what you guys think. i was pretty happy with it.:biggrinbo mods: 3 inch elbow back exhaust, cooleze intake pipe, kn fipk, 50 trim ct-26 @ 10psi, mk4 N/a whhels w/...

ok so this guy at work just bought a 350z convertable and i have been trying to get him to race since he bought it but the weather has been too bad. anyway today i get him to agree to race me after work but only if i bet $100. so isay ok with no intention of actually keeping his money. so we go...

ok so this guy in an s2000 wants to race me. the s2000 is stock except for an hks cat-back. my supra has 3 inch exhaust (except the elbow) cool eeze intake pipe, kn fipk, ct-26 50 trim turbo, custome upper intercooler hard pipe, apexi avcr @ 10psi , 12psi if i need it. who do you think will win?

so i went to the track friday to see if the new setup was any better than the previous 14.8 i ran with the old engine and blown turbo. on this particular day it seemed as though everything that i ran against was a mustang gt of the late 90s variety.i ran 6-7 of these of witch the fastest was...

okay i'm new to the site and i have tons of kills i would like to tell you guys about because evryone i know hates mk3 supras and doesn't care to hear about what i beat or did'nt beat so heres one when i first got my car i had a catback,kn fipkn and some heavy ass subs. i raced a 99...