Search results

  1. I

    Coil on plug conversion with 2jzge cross over intake.

    I would say LS coil as well too. Ideally you want the Truck coils with heat sinks, then you could just pull the boots from a 2jgte coils and build brackets and go. For the miata's I know they do the 1zz coils, and it fits well for them, but they have issues at high boost (18+ range) Also...
  2. I

    ecu master digital tuner 3 on 7MGTE

    Oh, so the resistor goes to the STOCK harness? Pretty much to keep it from throwing a code I'm assuming. What about the factory AFM? Is the signal from the DET3 enough to keep it from going nuts?
  3. I

    ecu master digital tuner 3 on 7MGTE

    Hey guys, I'm trying to figure out how to do the IAT install. I'm using a GM style sensor, do I need to add the resistor? I'm not in fuel implant mode, so I'm not taping into the stock sensor. There's already a scale table for the GM map sensor in the software, but wanted clarification on...
  4. I

    R154 No reverse?

    Hey guys, I'ts been a long while, but a friend of mine has a 2JZGTE swapped supra using a R154 mated to the 1JZ bellhousing. Anyway, we pulled it out of his barn, and it's got no reverse. Like literally, you cannot select reverse. It feels like it's not there. It won't grind or...
  5. I

    cleared it!

    cleared it!
  6. I

    EFI Fuse repeatedly blowing....HELP !!

    I remember there's another harness that also causes it to blow, I think it's for EGR? I remember doing a search via google by typing "site:supramania.com "EFI Fuse" and it came up
  7. I

    Why does my MKIII shimmy when going over small bumps in the road??

    Poodles, you think that would cause a shimmy in the rear though??
  8. I

    Why does my MKIII shimmy when going over small bumps in the road??

    I was wrong, drove it over and still the same shimmy. All the subframe bolts are torqued...any other suggestions? I'm going to put it back on the rack tomorrow and see if I notice something
  9. I

    Why does my MKIII shimmy when going over small bumps in the road??

    ha ha, so I couldn't stand the shimmy any more and got one of the guys to free up a lift for me....you guys are never going to believe this, the FRONT sway bar had lost all four bolts, and was only held in by the end links! Put new bolts in and it, and now the rear shimmy is gone! Hmm weird lol
  10. I

    Why does my MKIII shimmy when going over small bumps in the road??

    Thanks Poodles, you are a lifesaver! I'm going to do this Saturday, and I'll report back
  11. I

    Why does my MKIII shimmy when going over small bumps in the road??

    Tires are new, I haven't had a chance to put it on the lift, but I'm going to retorque the suspension first. I know this is asking for some spoon feeding, but does anyone have a "how to" on it?
  12. I

    Weld rear subframe

    Yes, I'd also like to see this
  13. I

    Why does my MKIII shimmy when going over small bumps in the road??

    it's definitely not a wheel bearing, I guess one of these days when I get a chance I'll put the car on the lift. I've been slowly falling in love with my Supra again. I've been driving my S2000 for a few months, and then decided to change the starter (shiver) in the supra, and have been...
  14. I

    Why does my MKIII shimmy when going over small bumps in the road??

    Pretty much what the title states. When I'm going over little bumps in the road (or even big ones), my car shimmys. Like it shakes in the rear, and it pulls to the right. It's a terrible feeling, and there's a lot of road noise. Mine is a 88 Targa top, with 1uz and solid mounts, I want to...
  15. I

    Hi everyone!

    welcome pics?
  16. I

    Wiring the 1UZ-FE into a Pre-89 Supra

    Wow good deal Chambers! Definitely a great pin out! I really wish I had this when I was doing my swap ha ha!
  17. I

    just joined the 1uz club

    lol nah, I'm only running a SAFC and 315cc's and a WHOOPING...ready for it? Seven PSI dun dun duuuuuuun
  18. I

    just joined the 1uz club

    Dang let me know about those! I'll post pics up tomorrow morning. Lol just don't laugh