Search results

  1. viperkillertt

    Tach Issues

    No tach signal at igniter, no tach signal at the plug under the dash. No signal through whole wire. It is a black wire according to the diagrams and it comes off of the small plug off of the igniter. The car runs fine, but just cant get any signal. Please let me know what might be going on. Thanks!
  2. viperkillertt

    Post your IC piping!!!

    WOW! That is all i have to say. :)
  3. viperkillertt

    Building my Dream 1jz supra :)

    oh yeah, tons of updates. It is pretty much done and running, i just haven't had time to update this thread. I got it running on a Monday night and i had to move across the state the next morning, so i left it and took the minivan. I just moved into my new house, a week later. I am going back to...
  4. viperkillertt

    Paying homage to the new section

    OH MY GOSH!!! THis is awesome, MKIV section! YAY
  5. viperkillertt

    Show your remote oil filter and cooler setups

    Oh, i think i have figured out how to do mine. I havent done it yet, but i am going to build a plat near the clutch, and bolt it down to the plate. So it will be out of the way in the air above the clutch area. It seemed to fit well here adn also look pretty decent, currently it is just sitting...
  6. viperkillertt

    mass air flow sensor for a 1jz

    i just found this one, hope it helps. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AB%3ASS%3AUS%3A1&viewitem=&item=130158319563
  7. viperkillertt

    mass air flow sensor for a 1jz

    Does anyone have a 1jz-ge? I havent ever seen one on this side of the water.
  8. viperkillertt

    Fuel Return/Throttle Cable Questions.

    I second that also i think that 4 cyl or 6 will work. I believe they are the same part number, you can double check. This is to work on the MKIII not sc300
  9. viperkillertt

    2 wires on the R154, where do they connect to the 1jz

    There are two leads coming off the tranny, i am guessing positive and negitive, where do those connect? It is a R154. I found a set of wires in the middle of the engine harness, that are not connected. Is that where they connect?
  10. viperkillertt

    Another few quick 1jz questions, hydrofan cooler?

    is it needed? The donor car didnt have it installed
  11. viperkillertt

    Another few quick 1jz questions, hydrofan cooler?

    I opened my box with my new, used hydrofan setup, well there is a big cooler in the box. Is that stock and where on earth should i put it? Is it really needed? Also, there are two leads coming off the tranny, i am guessing positive and negitive, where do those connect? It is a R154. I found a...
  12. viperkillertt

    How does the 7m oil cooler work on the 1jz?

    I am sorry, my mistake, oil cooler. Is there a stock oil cooler? i already have a kick ass intercooler. Also, is there a stock cooler for the hydrofan setup? I found one in the box with the new one i just got. There wasnt one on the donor car.
  13. viperkillertt

    How does the 7m oil cooler work on the 1jz?

    so, no stock oil cooler on 1jz? thanks
  14. viperkillertt

    How does the 7m oil cooler work on the 1jz?

    Ok, she is about to start up, but i dont know where the oil cooler connects. Is the oil cooler required? Is there a different one for the 1jz? Thanks!
  15. viperkillertt

    WHat am i? 1jz Wiring question.

    Hehe, i am fine with my 15lbs of boost for now. :)
  16. viperkillertt

    mkiv vs mkiv tt?

    I know, i have been on SF for like 4 or 5 years now and i only found this awesome place like a few months ago when i got my 1jz. I love it here and you guys seriously rock. It is amazing how quickly i get questions answered. I actually stopped posting on SF a few days ago, i would post a...