Search results

Will rod knock be confused with engine knock and send a signal to my computer to retard the timing? I just learned the sensor listens to determin knock based on sound. Also is there an audio recording of what engine knock sounds like?

What is better for higher HP motors? I have herd conflicting info but I know alot of higher HP motors or race cars use air to water. The ford lightning, the Typhoon, the Hen Viper Venom all use air-water why do some ppl say air-air is better?

its not an auto

any suggestions for getting the flywheel bolts off without the engine turning over??

are you serious.... your like a 7M GOD!!! =) I have never had to do that before my bad....

This is the first time I took out a motor with the tranny and bellhousing connected, I took out all the bellhousing bolts and I got it out like an inch but it wont dissconnect from the motor!! I have been pulling and prying on it for 3 hours, is there something im doing wrong?? Normally I would...

wait.. I thought the 1JZ was the same thing as 7M 86-92 and the 2ZJ was the newer 93-98

My speedo does not currently work so I did not notice but somone said the Supras have 180 KM or about 120 MPH speed limiter on them, is this correct? I have a 88 Supra Turbo

btw, this is going on a fresh motor

I know it has probably already been discused but what is the very best T4 trim for a Supra? I want to make around 600 HP with minimal turbo lag. My understanding is the following is the best trim is this correct? what do you guys think? COMPRESSOR WHEEL AR/.60 COLD SIDE TURBINE HOUSING A/R...

where would I go to get an elbow that will bolt up?

I am going with a T4 turbo but do I need to buy another elbow or does it come with one? Where are you suppose to buy them? I need it to go from a T4 to the stock downpipe bolt pattern

You can also change the gearing by tire size, if you get bigger rear tires you can actually change the gearing dramatically making the gears longer. It looks kinda cool too and no need to open rearend or set backlash. If you have 50 sidewall now if you go with like 70 your gonna notice a big...

okay THX, anyone care to explain the other topics??

Well, first of all I have rod knock and wanted to know why it is so common on the 7M motors? Is it something we cause? Also I was reading Grim's engine overhaul post, (nicely done btw) you dont unbolt the bellhousing, you just take the tranny out with the engine? I have always unbolted the...

When you carry an extra headgasket and socket set in your trunk

One of the main reasons is to be able to put any front mount intercooler you want on. The stock piping and outlet positon is uncommon and your upgrades are very slim and pricy.

You gotta lube it up and work it maybe get a friend to help, remember, your car is still a Lex virgin!! You gotta break it in a little =)

I run 12-13 and it works great on 93

umm... I thought STOCK was 35-40? I thought the point was to be able to turn it up a little not set it at the lowest stock pressure possible?