Search results

Ya u2 isn't even used on stock ecu until the engine warms up. Iirc 160* or something.

Shouldnt be the problem. How Is the CPs wiring?

It will usually be hot since there is a coil in it. Check your codes. Bad injector would be a problem at more than idle.

Oh lol. Havnt read the first page in a while. The big red letters. lol.

Could use the little round stock on rubber things for like glass and such. Could buy them at any hardware store. Double sided tape might cause the wing to tick when you go to open the hatch or get dirt stuck to it or even come off when you open it.

I think he should do a good buff polish and wax and make the paint shine and get some sort of light on it so you can see the shine on the paint. And put the head lights down. Thats an awesome place to take pictures. Whens the deadline for the cutoff? Depending on where i go and when the...

Whats the key look like? Butter alternative might be going to toyota and having them make you a new key and trying that. Iirc keys are like 7$.

Its a pain in the ass. And just to have twins so you can say you have twins is rather eh.

Stock replacement would prolly last longer as it should be rated for higher pressure. Iirc its one of the reason poodles doesnt like it. Just looks fancy. I need to paint mine black.

There was a dyno day 3 pulls for 20 at fsr motorsports yesterday. All the donations went to the food. Highest was 517hp. About 15 cars. Here are the couple pics videos i have.l Was 100* out and i didnt really want to do much. If my phone quits acting up i might...

I use one. No issues yet. Only like 2k miles./

??? These sections dont get viewed as much. Turbos dont like "back pressure." They want a free flowing exhaust.

Those are crap. Swap them out for ngk coppper p/n 4644. Rock auto has them for a 1.61 each and there is a 5% discount code in there section on here. Do you have any codes? Cps wires good?

It is long enough. It only goes from the pump to the drivers side of the rack. http://store.driftmotion.com/static/i-7mpshose.php Specifically for the 7m.

The one on dm is the high pressure hose. It will work for 7m/1jz/2jz. They all use the same fittings. Also rock auto is a vendor on here. There is a 5% discount code in there section. And a good place to buy parts.

Driftmotion.com. What is the part number for? What store?

Find a small precision turbo that will bolt on or make a adapter plate. Cheaper, faster spool and better performing by far. Esp with a billet wheel and ball bearing.

Powder coating is usually about 1mm thick. Paint would be much less.

If you want top end don't bother with stok tiwns. Upgrading the compressor wheel won't do squat for top end. Twin gt28r would be a nice setup if they fit. Could always use assorted to make them fit. Most people won't bother with twin setups as there not as efficient. And if they do...

Could use a rhd power seat and then have power on both seats. But drivers seats weigh like 70lbs so you will e adding like 40 lbs.