Search results

  1. I

    Anyone running a GT35R on a 7mgte

    4067 is a hybrid so probably won't be listed anywhere Jake. There's a thread discussing them on SF and one of the shops just announced they have stock. The 3540R is listed as a 700hp turbo but doesn't have the overhead you require.
  2. I

    Finishing Rebuild, need help.

    Good to hear! Might be an idea if you start a rebuild thread with some pics ;)! (now we have an official rebuild section)
  3. I

    Dash lights esp: CC

    Drew: LOL good catch ;)!
  4. I

    Finishing Rebuild, need help.

    Hammer: LOL not at all at least you're learning :)!
  5. I

    Anyone running a GT35R on a 7mgte

    William: Yep certain I measured mine. As I said a 3540R is a very different beast ;)! Direct comparison GT3540R to a CT26. 35 ..comp wheel 2.41/3.22 CT26 ...comp wheel 1.75/2.50
  6. I

    REIGN's REBUILD! Its a beautiful thing... (THAT IS FOR SALE) =(

    Jake: Read in another post he's waiting to get his IC pipes made before he can run it.
  7. I

    ignition for 89 N/A-T

    Chucky: I made up my own harness. Jump onto MSD's site and ask one of the tech guys in the forum it may take a little while to get an answer though!
  8. I

    Anyone running a GT35R on a 7mgte

    GT3540R has a 61mm inducer and an 82mm exducer it's a very different beast from a normal GT35. (normal 35 is a 57/76mm wheel)
  9. I

    ignition for 89 N/A-T

    I removed a bunch of the lobes from the reluctor so it would have 6 firing events to trigger a standalone ECU. I'm not sure if MSD have an amplifier that will be a lplugNplay using the stock NA ignition though. On my new motor I've been running 2 x MSD Dis4 amplifiers and 6 x MSD CDI coils...
  10. I

    Finishing Rebuild, need help.

    I do it but then I'm a bit old school ;)
  11. I

    SM more active than SF

    I shouldn't but I'm LMAO here! ;)
  12. I

    metal head gasket thickness.

    Yep only hassle is our heads tend to anneal when they've been overheated a few times and go soft :(
  13. I

    Finishing Rebuild, need help.

    I probably would have gone for a 2mm gasket if I wanted to run 14 but if you put some good gas in it you should be safe (always assuming everything else is right)
  14. I

    metal head gasket thickness.

    LOL thought you said funds were tight? Even a basic rebuild on a 7M is expensive Joel :( Better NOT to hurt parts before the rebuild.
  15. I

    ** URGENT PROB! Pls read! **

    AJ: The horizontal shelf is much bigger, think of the pickup there is a big enough hole in the baffle for it to fit through! Maybe jacking up the back of the car would help but it still might not roll forward as it's a hex key so will probably be sitting on a flat (I'm assuming Petes used a...
  16. I

    metal head gasket thickness.

    LMAO Joel! The "Gee Whiz" factor of 14 psi is far outweighed by the "Oh Shit" factor of a BHG ;)
  17. I

    Finishing Rebuild, need help.

    The Block needs to be very smooth for the HKS gasket to work I believe it's one of the more fussy MHG's.
  18. I

    ignition for 89 N/A-T

    Chucky: I modded it to fire a Wolf ECU.
  19. I

    metal head gasket thickness.

    Correct 10 degrees. I'd even back the boost down to maybe 10 psi in case it spikes on a hard pull. As I said detonation will kill it so better safe than sorry!
  20. I

    Finishing Rebuild, need help.

    Were the Block and Head surfaced for the HKS?
Top Bottom