Search results

  1. I

    girls=

    Sounds like he's lacking in the bedroom as well if they're looking elsewhere ;)! <jk>
  2. I

    Group A's group a rebuild

    Yannis: I have the same gate here they're HUGE! (but I suspect Steve has girlieman hands ;) )
  3. I

    Changing Cam seal tips?

    Undo the cam caps and the seal pops out even with the permatex Lanky ;) <ignore this post please>
  4. I

    Changing Cam seal tips?

    Eric: Glad to help it's a real old school thing and most times doing it this way you can press the seal in 90% with your fingers so you don't deform it trying to hammer it in a light tap with a soft face hammer or piece of wood and you're all done!
  5. I

    Maxima HID's

    Can you get a night pic with it lighting up on a wall? (Want to see the beam pattern)
  6. I

    picture post

    I like! :)
  7. I

    Changing Cam seal tips?

    2a: Put a thin coat of permatex #4 around the outside of the new seal and some grease around the inner lip this will let it slide into place and when the permatex sets it will stop the seal leaking or moving if you get blowby from engine wear.
  8. I

    Odd things that happen at your job.....

    Avatars! Too many of Greg's and you'll look like Lanky's making it so the closest you'll get to a Supra will be 92t4life's ;)
  9. I

    What the hell is this crazy thing!?

    I'm the last person to be a "Leave it stock Nazi" the only part on my car that's stock is the Diff and that's next on the list! But at least try and understand what it is what it does and then have a good reason to remove it! As JJ's pointed out the more a car is hacked up the harder it...
  10. I

    suspension recs?

    I'd shop around the vendors here such as MDC and HPF's and see what they can do for you!
  11. I

    Getting nitrous bottle powdercoated? any problems?

    Ok points to consider. What material is the bottle What Temper if any What Temp does the Powder Coating process use If all of this checks out and you get it coated then retested they WILL restamp the bottle trashing the Coating in that area..... as I said too much hassle for...
  12. I

    What the hell is this crazy thing!?

    LMAO "Lets all pull random parts off with NFI what they do and what it will effect cos it's gonna give me a bazillion HP yo" ;)
  13. I

    suspension recs?

    Only "issue" I had was when a stock bump rubber split and I bottomed a shock smashing the damper piston inside! (Get good bump stops) Other than that no leaks no problems at all! I went Eibach this time as they offer a great choice in rates and the quality/consistancy is right up there!
  14. I

    charcoal canister

    Grab a small JDM Plastic cannister and tuck it away under the inner guard plastic cover! Clean engine bay and Clean air done! (don't be lazy guys) ;)
  15. I

    suspension recs?

    I ran a set of Yellow's from 1997 to a few months ago and when it came Coilover time I had a set of custom Yellows built to my specs :)
  16. I

    Valve Shims. Stock with 272 duration 8mm lift.

    I think they were $600 aud/$440 usd and around the 2 week mark Jon. Can't see shipping being much more than $20 aud for the weight.
  17. I

    turbo???

    Devil: I think with a .83ar turbine it would deliver it's power the same as my 7M with it's 1.06ar and to me it's just about perfect as it doesn't have a huge hit until 4500 but below that pulls like a 15 year old boy!
  18. I

    I know this has been discussed, but still! ELECTRIC FANS!

    I still say if you're reaching for 3hp there's something wrong........
  19. I

    Aftermarket harmonic damper ?

    LOL that's not a gauntlet that's a bitchslap ;) Let the games begin!
  20. I

    Group A's group a rebuild

    Steve: Didn't realise you were buying from Morrie! Should have mentioned my name you might have got a discount! ;)
Top Bottom