Search results

Having a leveller makes life SO much easier ;).

Ahhh ok that rules out another possible

Was the block decked?

My Ferrea's are 80 ft/lb installed ;)

Did you RTV the Join between the Block and the Front cover at the deck surface?

Nice blankie I :love: mine.

Never measured a set of new 7M springs but I'd surprised if they were that light.

Blade: Describe how you fitted the seals please?

As a side note ANYTHING you do to improve a motors VE will help no matter what it's output and intended use ie: port job. With all of the mods done to my motor it makes great power and torque off boost and this helps everyday driveability and getting the whale moving. Even without the...

LOL @ the 20 or so shops :( @ the 1580 quotes.....

My take on the BBC springs: I'd be concerned that a spring failure means losing the motor as it will drop a valve, at least with duals there's some redundancy. Point in case>

There are variations car to car due to tolerance stackup during production and while it isn't a huge amount it's there and this is why the shop askes you to measure your particular car to be sure. I measure from the Seal on the Trans to the bolt centreline for the centre bearing and then from...

SB: I had one fail when I was NA so it wasn't a power issue ;) I had the rear section replaced with a tube end of problem.

Not a big fan of one piece shafts but that's been covered here many times before ;)

It shouldn't need to be but trust me the bonded section failure is a lot more common that you'd think due to age/power/driving style.

Take it to a DS shop and have them put a tube in to replace the bonded section (making it a 2 piece) ;)

Either he's a midget or ALL the women are 6'11" ;)

23 splines sorry NFI on the rest. (340 and 154 use the same slip yoke)