Search results

  1. I

    Cooling Problem? or bad HG?

    There's meant to be a plastic undertray from the front air dam to the front crossmember if it's missing you can end up with "issues" depending on the condition of the cooling system..
  2. I

    Cooling Problem? or bad HG?

    Fan shroud? Engine Undertray?
  3. I

    ground points...

    Drop em 5 thou and see how it goes if it improves do you have anyway of manipulating timing? ie: Standalone?
  4. I

    ground points...

    Nope as I said "around Tq Peak" ;)
  5. I

    ground points...

    Mark: Often breakup around Tq peak is caused by spark blowout try dropping the plug gaps a bit and see if it improves.
  6. I

    My piston rings are gone...what are my options

    Where'd they go?
  7. I

    ridiculously simple auto tranny question

    If you just stab and go it'll flash up almost to the rated stall speed but if you hold the brake depending on how powerful the motor is it'll exceed the rated, you need a well sorted chassis and tires to take full advantage of it. Downside is normal driving it slips and makes roadrace type...
  8. I

    Too much power maybe?

    Too little skills may be more accurate ;)
  9. I

    what's this thing?

    British Standard Pipe National Pipe Thread Yellow pages
  10. I

    Some people are just dumb.

    Care factor..... 0.000% There are cockheads in all races.
  11. I

    what's this thing?

    It means he's a dipshit that gets paid minimum wage..... Go to a Hydraulics/Hose place.
  12. I

    Cigarette lighter doesnt work... quick question

    There is a small spade terminal on the back of the lighter socket that pops off easily if you've been in behind there at all check that as well.
  13. I

    Most Beautiful Cop Car......*pics!!*

    LMAO an NA with a light bar might crack 100 mph with a tailwind ;)
  14. I

    Which rod is which??

    Justin <golf clap> well done :)
  15. I

    Which rod is which??

    Justin: IF the Eagles are resized and inspected and balanced correctly yes they should work fine ( Dennis over on SF posted his Eagle weights and they were all over the shop) Pauters are like fillet steak whereas Eagles are a chop ;) DK: Oil pump drive shaft. Jay: Knew I had a pic...
  16. I

    Which rod is which??

    Rich: Make sure the "residue" is all cleaned out first ;)
  17. I

    Casey's Ricer RHD Build

    Casey: Couldn't find any T Bolt clamps with longer bolts?? :stickpoke
  18. I

    FAO Jeff Flange

    No probs I'll chase it up Monday Kai!
  19. I

    Pretty new member... Need additional advice

    Pretty?
  20. I

    Which rod is which??

    Jay: The Beams of the Pauters hit the bottom of the bores on a 7M (they come with a diagram explaining this) I just used a Die Grinder with a stone to relieve the bore then smoothed it out with a polishing roll, takes about 3 minutes per hole as it's not a great deal of interference. And...
Top Bottom