Search results

Those were the nylon Unobtanium sets... The polys are much less expensive. The group buy was togh to pull off at the time, because they were about $750 a set. The nylons are harder material and also required the zerk fittings to be added, for routine greasing to keep the...

...I still have the sputter and was finally able to get a code... 14. Swapped the ignitor and still the same. I checked the 1st 3 coilpacks, according to page EG-522 of the '95 TRSM and while hot ~200F, am getting 1.3 to 1.5 resistance. Supposed to be between .68 to .98 Would love to...

Doesn't seem right... Lemme go check.

I got mine from Napa. Never gona use it again. I'll be glad to send it out to you (if I can find it). I had to re-tap the top holes for the tranny bolts on my block, where I stripped 'em.

Yep! I used a 2-part epoxy from the auto parts and screwed up the first time. I had to "undo" them and it took ALOT of work to cut back through the epoxy, etc. That will hold things together for sure. FYI... If you paint the inside plastic (I used chrome), you need to tape the edges in such...

Been couple 'o days... Status?

Here's the link to the info as we were gathering it. Hopefully it helps... http://www.supramania.com/forums/showthread.php?t=74174

I used the free-loan tool deal at Autozone for a stage one pump and left a vacuum of 30 on my system overnight before trying to refill (which I did not get to finish). I have the manifold/gauge set which reads vacuum now, so we're all set in DFW, if anyone wants to do their retrofit...

^^Kinda... SupraStanger and I had a thread going (maybe here or on SF 2JZ section). TRD87T came over and we wired mine up. Went to refill, but I had some type of blockage and ended up replacing the expansion valve, o-rings, and a line. Re-tried to fill on my own, but think I had one of my...

^^Ya know, I didn't see the detail about the rings and was wondering if we could get them, like I did for my aftermarket wheels (any tire shop, Ebay, etc)? Are they that much different and have to be made of metal? I am asking if it's not necessary and duplicating efforts or taking more...

Sorry... DM sending out tomorrow. Ineed to be done this weekend, if at all possible.

...Kewl with any options, since I have not re-filled yet. Replaced a bunch of o-rings, lines, dryer/receiver, etc. TRD87T let me borrow a pack of misc. A/C o-rings. Easy enough to take care of. I can go R134, or even some of the other alternatives, but have set myself up with the the right...

Ordered some today, hoping to have by the weekend.

Just for clarification, you are talking about a full set for front and rear, right? I only intend to maybe use the fronts. Either way, count me in for 2 sets...

^^X10... Also, maybe the trannie's tailshaft seal.

I will see what I can do, when I get home tonight.... Also, I have the A/C manifold gauge set (includes vacuum reading). I've been busy as hell, but was going to go get the vacuum pump[ again from Autozone, pull some vacuum, then re-fill. Anyone up for coming out to The Colony for a...

Good info, but I think the problem's been getting all of the exact details to putting a kit together. If there is a true "here's everything you need, + options, " kind of kit, I would probably go that route. I have done "some" research and was not able to find a complete kit. Everything had...

Saw some brief instructions at Driftmotion, but there was no reference to installing the zerk fittings, which was almost a must for the nylon Obtanium set I had before. Are these quieter and not needing to be lubed after insall?

Dunno. I might be able to help, if I see a pic...

Thanx! I left a message, but it was a standard greeting. Have not heard back yet. Got a nephew coming into DFW for some training/work deal for a few days. Gonna have less time for troubleshooting/fixing and I still have to get a couple of climate control color changes done.