Search results

I like the wheels on that black one, but the brakes need some paint :D Looks like you wisely swapped the pre-89 mirrors for some 89+ ones as well...but why did you change the mouldings?

THE FUCK?!??! IF you're gonna cut the springs, you cut from the top as they aren't tapered there... Did you slap the previous owner?

Leather is easy to take care of compared to synthetic leather. It's also much more durable.

Cars without A/C usually run a different box under the dash. Instead of having a heater core and an evaporator, it has only the heater core and is much smaller. On a side note, on many GM vehicles they had the A/C "briefcase" in the engine bay that people would get the non-A/C blockoff plate...

He already did...

I "settled" for the MKIII, but it grows on you a lot... I still like seeing MKIV's, but it seems that they all look the same... Growing popularity? Well, judging by the amount of posts, I'd say the Honda guys moved up to the 240's, now the 240's are too expensive and they're moving onto...

You don't own a flashlight? I'd have to go outside and look, but from memory they're pretty easy to spot...

Cooleeze intercooler piping. The piping that goes through the fender is larger and doesn't allow enough room for the airbox.

I would buy a lexus AFM as you can just use the box from the lexus in your stock housing until you decide to get injectors. It's what I did. Also, you can clean the hosuing all you want if you remove the electronics first, and if you CARFEFULLY use a lint free cloth with a little solvent (I...

Yeah, good way to fuck up the bearings, wristpins, pistons... Don't just let the moron slap them in and say it's fine, it needs to be torn down and everything reinspected...

Hey, cleaning the threads in my block took hours... Bolts use about half the depth of the hole, studs have to go in deeper or you'll run out of threads on the top and never toque them down correctly... Back to the subject at hand, if it's a MHG, you MIGHT be able to retorque it and get it...

I found that I got a bit sick when I played on my bro's computer and not mine, but I have a light to the right of my desk and he doesn't. Much like in an iMax theater, if you can't tell that you're not moving in some way (like the light next to my desk, or backing away from the screen) you...

Yeah, not safe at all You might be able to look and fix it tonight as it's not too hard to find the joints...

On a stock headgasket, if you blow it, you deform the sealing rings. Torque it down all you want, it's not going to fix it...

Yep, that's what I was talking about.

Stock air box has some flaws in it's design IMHO that limit power, but I'd still be running one if it would have fit with my hardpipes... Running high boost on the stock piping won't end well either ;)

I like my stock one :D Plugs in, comes with the heat sheilding, gasket, and flange... My cheap one didn't last long the OEM one I have now has lasted much longer...

So far as I've seen, no. No idea about Japan though...

Rack didn't slip, one of the joints did... Don't drive it until you find it...

Well, if your coolant was low, where was it going? Not saying you don't have a BHG, just saying that running hot definately will lower your power...