Search results

ok that makes me feel a little better. but i feel like there was more play than that. ill measure how much play there is when i get home. ok good. as far as the squirters themselves, i believe there were cleaned with the motor. but should i soak them or something before i install the new...

im finishing up my build and i had a few questions. the motor is pretty much ready to drop in but a few things were of concern. the oil pump pulley is installed and torqued, but i noticed that when i turn it counter clockwise there is some in and out play. but when i turn it clockwise, it...

also i wouldnt be driving if your running too lean while the car is under load

i guess i dont know what im talking about then

did you recently install the wideband? or what i mean was it working before? did you smell gas when it was idling bad? -pete

maybe advanced wasnt the proper word. they are just a different animal. and your right, building up a 7m isnt cheap. but for either motor, a major rebuild isnt cheap when you put in lots of performance parts. it obviously depends on what your looking for. ive been in a 2j before, and i...

what a crying shame.... 7m motors are far superior in my opinion

come on..... just 5 more people

-Eagle Rods 440 -CP Pistons 750 ish -Bearings 150 -arp head studs 115 -water pump 55 -full engine gasket set (toyota) 320 -Titan 2mm MHG...

i had a leak from that same spot. it ended up being the wiper arm plug. i replaced it and the leak is gone. is your spoiler loose?

in that case i have no idea what your talking about. as far as i know, you add refrigerant to the system through the AC lines.

try listening to the advice everyone is giving you..... look in the manual so you wont have to ask such noob questions here is a link to make it even easier for you..........TSRM yes they are supposed to turn if properly torqued down.

yes, its a rubber plug that connect the wiper arm to the motor and keeps water out of your hatch. toyota sells them. not very expensive and very easy to install. not too sure about the spoiler -pete

you added oil to the compressor, or refrigerant to the system? most reputable places will service your car. R12 isnt available to most places, so they will likely have to convert your system to r134. meaning they will have to completely evacuate the refrigerant and install the proper r134...

he means the toyota service repair manual (TSRM). google it and you'll realize its a gift from the gods. it will give you the proper torque value for each bolt. -pete

also, i completely overlooked one other part of this build... the oil squirters. there were installed when the block was cleaned. the previous owner of the block (jblmk3) said it was in good working order when he pulled it from the car.... so i assume the squirters are in ok condition. just...

i cant seem to find the led for the climate control on the site.... T1 (3mm) will this bulb work? RL3-B2030 Blue 3mm LED 3mm BLUE Super Bright Led 470 nm / 2000 mcd / 30 Degree Viewing Angle

Here are some latest pics. Any ideas about the oil pump pulley? ^^

my plans got kinda backed up. i might be dropping the motor in that day, but ill let you know. -pete

i printed it out but it wasnt listed in the installation of engine section. thanks