Search results

Folks, I hate to point this out... AGAIN... but we have picture uploads turned on here, unlike most forums. So just attach your photos to your post, and the forum will store and thumbnail them for you.

Got your email Nash, edited your original post a bit and added the pictures you sent. I also overlayed the two pics so you can get an idea of how long the throw is. Your camera stinks, but after you sell me one I'll take some better pics with my G2 and post those instead. Still need your...

What IJ said. Here's the msds for it: http://physchem.ox.ac.uk/MSDS/TO/toluene.html

Works here, too. I have some beefs with that car... like who puts in a Turbo A duct and then puts their license plate overtop? And the mirrors are FUGLY.

Nicely done, Joe. One of the better looking cars out there.

The lines to your oil cooler are usually weeping through by now if they haven't been replaced, and they are on that side. They only cost a couple dollars - well under $10 - to replace with new oil hose from any auto parts place. The one end to the oil filter fitting is a PITA to get back on...

No access to scanner from here... and the ink is fading on my slip, so boring text from me, too. 14.071 @ 99.8 Hmm... significant mods at the time: complete 3 inch exhaust, BIC DDP, DrJonez MBC, K&N FIPK, Spec clutch & RPS flywheel, Michelin snow tires at 17psi on stock sawblades.

Congratulations! Always a good feeling, isn't it? :)

As they say, every man shall meet his weird. :D

Feel free to snag my MAFT install from http://idriders.com/supras/maft - might help some folks, even if it is STILL unfinished, it's better than the one from FTS. :)

All I can say is wow. http://www.msnbc.msn.com/id/12526001/?GT1=7938

You are correct, it doesn't matter. :)

Correct. The two similar wires are power and ground for the heater element, the single wire is the signal wire for the ECU.

Stretch, I haven't had the opportunity to try one of the V2 units. I have tried the Cs, and I like Nash's way better than the Cs.

Billet balsa... I have no idea what magic they used to make it hold up to a puck style clutch, but it's lightweight and works! ;)

Hey Nash! Two things - email me any pics / vids you'd like in this thread, and I'll attach them to your original post. And post up your paypal info, I'm in for one. I'll take the shorter of the SOGI / NM height, no threads on top as I use an aftermarket shift knob. I'll be glad to post some...

Correct. Ron has one on his car. The thing rings like a bell when the starter disengages!

I picked up one - mostly because I didn't want to pull the existing one and wait to have it machined, I wanted a 6 hour swap, and me driving the car again without any downtime. I haven't been sorry yet, picked up the RPS billet flywheel.

Go the other route. Show him what car to buy, or how to make his car fast enough to beat you. Get him to pick up a 6 bolt DSM all wheel drive, fix the damn IC piping, pull off the exhaust and crank up the boost. Then take him out to the track for a grudge match and let him win. Problem solved.

I feel compelled to point out that I always strive for a higher standard than comparing here to other forums, as that's a standard that changes rapidly and unpredictably. I know other forums that are better run and more polite, and I know many that are downright nasty. I want to be part of a...