Search results

Okay guys I love the conviences like AC and powersteering but you know what my AC doesn't work and my powersteering leaks. I already took out my AC. However I don't really know what to do with the Powersteering pump. Is there a way where I can just run straight rack and pinion. Please let me...

I don't have the usb for the camera so on my way to Fry's LOL ---------- Post added at 03:11 PM ---------- Previous post was at 03:10 PM ---------- despite the little problems the car runs pretty decent.

Well, changed out the turbo this weekend and it doesn't smell as bad but you can still get a wiff of oil or gas. Smells a bit like both plus the car has being making this noise for a long time. I'm debating on whether to sell this thing cuz its too much work and too much money for a dude like me...

Have a good condition motor with a standard rebuild on it, however I'm running the same old turbo thats been burning oil, I am going to put a new turbo on, this upcoming long weekend. I am just curious when a turbo burns oil can you check it by opening your radiator cap when motor is cold, by...

Here are my questions. Is there a thread on here about what the difference is between what a 4 puck, 6 puck, and 6puck grooved are? Also what would be better for an r154 mk3 turbo? My tranny hasn't been surfaced ever, the tranny is leaking from the tail where it meets to the driveshaft, anyone...

Popped open the radiator cap and there is oil in it not alot but you can tell, thinking I have a BHG don't know if the turbo burning oil has anything to deal with it. Oh well just run it till it dies. Hopefullly a year ez.

Yeah TSRM saying something about it, Also I'm going to need to get all the gaskets for it Iwanna get steelbraided lines but kits are expensive and I am too dumb to make one up on my own.

I changed my old clutch master cylinder to an aftermarket one because the slave was changed, and this one was giving out and leaking fluid slowly by the pedal. Reason for the delay on changing was because no funds at the time. Anyway so we change it out and put it all together and bled it. The...

Any of you guys know how to prep a turbo for installation just a stock CT-26

No check engine light the car just died, after going a bit over red. But ummm so far the car is running fine. the Tranny is leaking fluid from somewhere though the slave and master is done so unknown. Theres a thread on here about this. Oh yeah and my Turbo is burning oil but I'm going to see...

Oh shit, opps its 20over Thanks for the point out Wardog! ---------- Post added at 11:40 PM ---------- Previous post was at 11:38 PM ---------- yeah no miss shifting just burning rubber and tapped over the redline.

Good info, I will save this thread for a future project for my car leaks in the same place.

Good thing i wasn't doing it down shifting. But yeah I got clutch slippage. PLuss a lil maintenance required I hate living in an apartment, can't really do shit to my car. Car was operating temp too.

hahaha I know we were just screwing around.

Glad to hear from ya Todd! It sure has been awhile yeah I'm a lil scared and my clutch is ify too from a couple burn outs it hasn't been changed since the old owner so thats a factor. Haven your friend in the car ridin shotgun trying to pick up chicks is not a good influence. Then again only...

I got a new jdm TB set up and wasn't used to it... LOL but umm I dunno I just feel scared never over reved before. NOt only that my clutch is toasty and its time for a new one as well, its a project. ---------- Post added at 05:17 PM ---------- Previous post was at 05:16 PM ---------- What can...

i was having a little fun with my 7m and I over reved it it went to about 6600 barely over the limit. However the car then shut off. I started it back up and it idled fine and temp was good, so was oil pressure. I am due for an oil change and I need to change my plugs. The point is after I over...

Well. Specs are kinda on the hazy side. Apparently before it came to be in my car the engine was pushing 450hp and could handle more. Its got JE pistons bore unknown. arp studs hks head gasket size unknown. eagle rods i think and arp main caps, heads been redone. and i got a new engine harness...

Its been about a year since the Supra has been on the road. Through searching and searching, I found Kaizen Motorsports. Thanks to Jose and the guys the Supra has a new engine and the car runs very well. Out of a stroke of luck Rodel happen to be there the day we had to make the descision of...

Isn't it like 0.034? i