Search results

Looks awesome. So where is the IC going to go? It doesn't look like theres room between the headlights, is there? I assume it's going below the bumper. Please tell me you're going to paint it black so it's nearly un-noticeable. :evil2: PS- The exhaust piping- I don't remember if you...

So did you ever get oil pressure to read?? PS- I wouldn't automatically assume that 51 is for AC. Check that the plug going to the TPS is secure.

I liked that vid- I did get a bit dizzy with the fast pic changes, but it was still well made. I was pissed when you took it down- I reloaded my video card drivers so I could see the video(it was in negative colors for some reason), and when I got it back up and running- the vid was gone...

In any case, problem solved, proper advice(take it back out and mic' it) has been given. We'll wait for the "7M shortblock wanted" post if he doesn't do it. :biglaugh:

Hey don't worry- you didn't sound like an ass at all.....throughout that entire tirade....nope. Not one bit. :eek: Dude- you need to remove everything from the top of the engine, and make an inventory of what's good and what's bad. Unless something got into the block, I don't think you need...

...

Oh yeah- I have enough oil. I have only about 500 miles on it, and it's on it's second oil change, and has an additional quart in it. I also lowered the oil pickup about a half inch when installing. It is a used pump that I disassembled and checked clearances on. Even though they were good, I...

This is an awesome project, man. If- when you're done, this thing looks almost totally stock, I think it'll be one of the coolest sleepers I've ever read about. :biglaugh:

Well, that's the thing- it does have high pressure when cold, but drops below my comfort level once its warm, about 30psi max at 3500 rpm, steady state driving. I would really like to see at least 15 psi higher in that situation. My plan is to replace the oil pump and piston oil squirters. For...

I see you're in GA. I know that Jarco Corp. does rebuilds, and I think they can redo them w/ a metal headgasket.

I have a set of those in .020 over sitting in the box. I went with Probe's myself. However- Sethron- you call them teflon coated- is that what it is? because mine has the same coating but they were described as anodized crowns, not teflon.

Yeah- I didn't think you could put such large injectors on a Lexus MAF.

I think that was the plate. A dark blue 87-88. You passed me on I-75 south, up around Windy Hill. Just wondering, because it sounded pretty good. :icon_bigg

If you lift it, you'll blow out two discs. If you only blow out one, it's a W58. :biglaugh: The R154 has two black inspection/ access covers, one on each side of the bellhousing. The W58 has none. That's the most obvious visual difference.

Haven't seen this thread in awhile. Awesome resurrection on the 'Phoenix' ! ::salute::

Dude- Check where the fuel line banjo's into the connector down by the driver's side engine mount. I left mine loose and made a puddle after my engine swap. Then I found the fuel line was loose up where the fuel pulsation dampner banjo's in. I'm an idiot. : )

LMAO! :yelrotflm Hell, for $200+, get an aluminum 2 row core radiator.

Well, if it only misses under boost, I think you do have a gap problem.

Well, I had Turbo Dave do my Intercooler piping and exhaust fabrication, and I can say that his work is pretty good, on that end, don't know about swap work. My only problem with my setup is that he ran the piping up under the headlight instead of the side(OEM) entry, which makes it a real...

What's NTI? I'm in Mooresville every so often.