Search results

yes in theroy the exhuast enrgy will be greater but by how much i have not a clue the best thing to do to ct26 is to port the waste gate hole there is big over lap soyou can die grind about 1 to 2 mill this helps alot of the upgraded ct26 made my boost more stable what will it dofor stock...

i am thinking he taped them both togetter and used 12 to 12 then to 12 = fire or melted fuse not eghough to blow the fuse but eghough heat to melt really the best way to do it is use 2 relay's 25 amp one should do but ti all about the draw that the fans pull

sorry but i hate subrues but that is rare care i herd they had there issue's thou don't know what they are

yes will's idea on flange is creep cause it can vent as good as it chould befor but there bad part to this if you over boost aka waste gate stays shut to long or can not discharge eghough will cause shaft to twist when the turbo get's to hot akak broken shaft out fo blance ect but you...

mc dicks should make the death burger you eat it and you die but then there whould be alot of dead sea chows all over the place

hey hey dave congrates man all have to drop by and see the littel guy

i going to try to make it to this one for sure this iland sucsk ballz

trust me dude you will love thous tires they don't hydro plain liek the old one's used to and that was the opnly thing i hated about the old ones

if more gas go through the waste gate then you will loose boost not creep that is what you whould call a spike raise then drops

you have an e1 boost controler aka good boost controler if you have some thgin that does not really control duty cycle it will creep bad test it put a mbc in there and see what it does

what type of fuse you got in there sounds like slow blow to me but all i can remmber is you have to run 12 guage wire at lest do nto tie both fans in to one lead but tellyou give me an idea on how your setup is then i cna not help you

thoues are pimp tire's nice tire choice sad part is they do not last long but if you want tire like that then ware is not an issue

divorced downpipe is creep maker i made one for my car but took a long time to stop it from creeping aka porting and maken the waste gate hole as high as it can go befor the divder wiht should be round that helped me alot when ti came to creep cause see if you use math in this is simple...

well i got my eletrical system all some what hooked up re wired the hole car just about (thanks crsio) for selling me a harness all that has to be done now is the egine bay harness i am adding in section so it does not have to run over top of the motor any more so now it goes under the...

to cheak isc just unplug it

good good fuse in the back is a must funny thing as well i used my old staero wire for my batt recate as well

why did you pick 0 gauge when 4 whould have done the job just as good and why doyou have your fuse so far away form your battie. it should be as close to the batt as possible that way if it ever does ground out you will have hot buring wire going though out your hole car aka bad fire make...

ummmmmmmm dude how am i suppost to ummmmm lift my hood with a harness going thour it :icon_conf

ooooo that hit looks bad did it hit the fram at all

can't see why not but i never done it so i guess it still up in the air