Search results

Sounds like youve done it right. Check all fuses and that you have every thing else hooked up (any thing you unpluged). Don't have any boost hoses open do you?

Stuck on 3. Fuck these things.

Unroll about 100 yards of extention cord - turn microwave on. Walk 100 yards away to power source, then PLUG microwave in. Also, I enjoy making plasma balls with grapes in microwaves.

The blue wire is the signal wire. If you've hooked up the o2 wrong, chances are youve blown an EFI fuse some where. Check and try again.

^No thats a guy who works at Cummins. Its a 91 or 92 with just an exhaust, but damn is it cherry! His name is Tom IIRC.

Any local sheet metal shop will be able to roll beads in the end. The machines most shops use are made by Pexto. Google time.

Acetone FTW! Also, if you ever have a problem with crazy glue curing, just mist some water on it. It will harden in a matter of a blink of an eye.

Does any one ever search... I'll try and find my write up about how to do a BHG on a budget. And yes, Aaron is right. If the head & deck are warped you are wasting your time without machining first.

I sell them. Check the website. You won't fint it any where else...

Sick man sick! Do you guys think there is a need for a custom built bmx frame these days? 100% hand made, custom distances of the crank from the neck, etc etc? I would love to make some custom 4130 chrome molly frames for people with custom neck & fork angles and different off sets...

Guys need to be careful here: Some brake fluids (forgot the technical term) love water vapor. Great for race cars with scheduled tear downs, bad for cars with 30,000 mile brake fluid changes. Also, another great brake fluid is the Wilwood EXP 600 plus. As take from their site...

Please don't start this sh!t again. He asked where you learned to work on cars, not WHEN you learned. Has some one hacked your account Jeff or please tell me you're not joining the OT mafia band wagon? :icon_conf To answer the poster's question: I started tearing apart all my toys at...

Have you been to the zoo lately he calls work?

Rad... holy shit. Yeah that movie was the shiz nit. I used to ride every day during the summer and even eat kix like those guys did. I used to actually know Allen Vano lol!

http://bmxmuseum.com/

I doubt I could BH over a coke can these days. :icon_conf :cry: :3d_frown: :icon_mad:

Doesn't always work with the welding.... The stock yota process uses brazing, and it will creep back up into the weld.

I used to back in the day when GT, Hutch, and Elf was hot. Started breaking too many bones lol. Also, Ive got an original Hutch for sale... found in attic.

Its not hard at all... an afternoon and you're golden. It will be spring before I make them again. You don't need a cage, although some say that they "could duck out of the way" in case the roof caved in during a roll over. My response? 1/2 BS, 1/2 truth. Hard roll over - not gonna...

Can either of you do me a favor? Measure the bearing ID and OD of the output shaft brg.