Search results

  1. I

    ECU with traction control and transmission control

    Using a generic Bosch 68mm TB and a 2007 Corolla Pedal that I piggy backed onto the stock pedal to retain the Aussie Cruise Control actuator. Don't know if the PCS is the best but it has more than enough functions to run the trans and is modern and stable hardware that's proven to be...
  2. I

    Aussie MKIII chitchat! (all welcome) NWS

    Dan: Full Ferrea and shimless buckets.
  3. I

    Oil in intercooler piping?

    Every single post you make just confirms you have NFI and are just parroting bullshit you've read on the internet. I asked you to describe the seal in a Turbo and seeing how you've dismantled many of then according to your post I'm still waiting. YOU come back with some garbage about no...
  4. I

    hydrolock

    Used to have an L20B with the factory BHG and the only way I could start it was to pull the plug crank it to pump the water out chuck the plug back in and fire it up ;) Once running it was fine the PoS didn't have enough grunt in the starter to bend a rod it'd just lock solid.
  5. I

    Clutch Grabbing near very bottom

    Smell it ;)
  6. I

    Oil in intercooler piping?

    Dude seriously just give up while you're behind.... :nono:
  7. I

    vented pcv

    bzzzz Wrong PCV and Charcoal cannister have nothing to do with each other ;) PCV gasses are sucked into the intake and burnt. Charcoal cannister handles the fumes from the fuel tank.
  8. I

    Clutch Grabbing near very bottom

    Feel the carpet if it's damp under the pedal it's the Master.
  9. I

    92nsx's supra build

    Well then there's no where else Coolant can enter the Turbo side of the IC so has me beat.
  10. I

    92nsx's supra build

    So it's been on Emilio's car twice?
  11. I

    Oil in intercooler piping?

    Ever pulled a turbo apart and rebuilt one?...... If so describe this mythical/magical "seal" please
  12. I

    Oil in intercooler piping?

    Blowby just impedes the Turbo's drain and will cause the turbo to flood and smoke in the exhaust not introduce Oil into the inlet tract.
  13. I

    My New 87 Turbo

    Score #1 Geez :)
  14. I

    92nsx's supra build

    Only thing I can think of is a cracked housing that's opened up as you bolted it back onto your motor :(
  15. I

    92nsx's supra build

    This is not helping the confusion dude why are you playing musical turbo's? Anyway it's the only place it can be getting into the IC from that side.
  16. I

    My New 87 Turbo

    Clear title?
  17. I

    92nsx's supra build

    Ok I'm a little confused by the time line here Rob. Has it ran since you changed Turbo's?
  18. I

    92nsx's supra build

    How far up the IC pipe is it wet Rob? (tissue wrapped around a finger will show any residue)
  19. I

    92nsx's supra build

    It's a ported head isn't it?
  20. I

    92nsx's supra build

    That's a relief!
Top Bottom