Search results

  1. I

    What is the hottest steering wheel for a MKIII?

    Momo Corse here and love it http://ij.supramania.com/momo.jpg
  2. I

    Walbro vs. Denso

    My engine is easily a 1000hp build but I keep it around the 550rwhp as a maximum to get some sort of longevity out of it. (have a look at the 1st page of my "what I did today" thread for full specs)
  3. I

    Walbro vs. Denso

    They're a bit noisy but hold perfect pressure all the way to 22 Psi boost so far. I have a brand new 300LPM Denso here I pulled out because of this, pity because they're so quiet they're a perfect daily pump.
  4. I

    Walbro vs. Denso

    Just that volume WILL drop off after 20 Psi boost pressure And just what "modification" is that? New 044 and 040's are made in the Czech Republic :( I had one of each fail within 2 weeks of installation, neither were ran hard. Using 2 x AeroMotive Tsunami's now and they've been...
  5. I

    From Porsche to Toyota

    Just 2 things that need addressing "prefun" as either can put a damper on your enjoyment.
  6. I

    stout hood

    Some people just don't learn..... :nono:
  7. I

    From Porsche to Toyota

    Do a search on BHG and ROD KNOCK ;)
  8. I

    From Porsche to Toyota

    I'd keep the Porsche given the choice.
  9. I

    broken bumper bolts???

    Front bar? The Bolts aren't captive and come out from above with a wiggle.
  10. I

    Kotu's NA-t swap

    Big ass roll of toilet paper there ;)
  11. I

    FINALLY - Especially for JMDigital - LilMissMkIII's Build

    Eat more and wait for old age ;)
  12. I

    cruise in pics

    mmm Chevelle :)
  13. I

    T bone collision with a bicyclist

    Ahhh ok thanks
  14. I

    T bone collision with a bicyclist

    So the car was unregistered at the time of the accident?
  15. I

    Do you HAVE to lap the deck?

    Gotten to the point here I'll buy a cutter and do mine in my CNC next time as it's hard finding a good shop that takes pride in their work.
  16. I

    Losing boost at 6400rpm. Help!

    It's still going to light off in the turbine housing Steve, just won't be making it's true HP potential.
  17. I

    Walbro vs. Denso

    Keep in mind the Denso's have an internal pressure relief valve set at 60psi, this can be problematic as it will relieve at base pressure +boost so ie: 40 psi base + 20 psi boost and it's open and bypassing volume.
  18. I

    Stroked NA

    Nick: How so?
  19. I

    Aussie MKIII chitchat! (all welcome) NWS

    Are your brothers 288 advertised or at 50 thou lift?
  20. I

    Aussie MKIII chitchat! (all welcome) NWS

    0 wear on the Cams or the buckets Dan. Can't see any reason why they wouldn't work with 12mm lift cams there's nothing to dislodge and they're very very light compared to stock.
Top Bottom