Search results

I use a Powerdex and the inbuilt MoTeC WB02 and on all the dyno's my car has been on the Powerdex has always been more accurate than the MoTeC ;) They don't have all the bells and whistles of the high end gear but for a fast reliable accurate affordable WB02 it can't be beaten.

or 3311 lbs for the US guys ;)

Yep that was on a full tank!

mine is 1820........ :(

No probs I'll ask tonight.

Or the combined value of 95% of the Mk3's here ;)

88290a is the CC Bellcrank

Top of the pedal needs to be extended or swapped with a RHD one>>

Anyone got a pic of a LHD Pedal assembly?

Cable is long enough to work leaving it all mounted where it is.

I'll ask a bud of mine tonight, not sure which bits he has left. Where does the Vacc Motor mount on a LHD car? (never mind I found a pic) The RHD one mounts where your ABS lives and uses a short direct cable to the pedal bellcrank, I can't see any reason why you're existing motor and...

I bounced the MoTeC DBW as Cruise with the MoTeC techs and while it "could" be done it was going to be a nightmare to implement as it needs 2 distinct signals to be generated. Doing the mechanical version proved much easier and I'm pretty sure could be a retrofit on a LHD car if not a direct...

Yep the load leveller is a must.

Up to you.... At least try turning the shaft 180 in the diff and bolting it back and test drive it.

Al's engine crane ;) I use a chain hoist in the shed.

Brad: A gumby test for the balance is to tape a section of the shaft with electrical tape to protect it the grab a hose clamp the shaft size, undo it to open it up and slip it over the taped section. Snug it down and mark where the clamp screw is with a magic marker and go for a drive, move...

LMAO zzzzMATlockkkkkkzzzzzzzzzz :: IJ. ::

I :love: you SA marry me

Welcome to SM Drew, it's NOT a starter :D