Search results

  1. I

    head gasket search

    Stop dating fat chicks? ;)
  2. I

    90 7mgte powered supra

    No probs at all I don't mind sharing, it goes in the lower rad hose.
  3. I

    Answer the question with a question

    Don't you think fucking them would be more fun?
  4. I

    90 7mgte powered supra

    The stock waterpump is a bit lazy at idle and cavitates like a bitch at High RPM so the booster pump fixed both issues, I recently ran a heat gun over a mates 7M idling here and there's a 30c temp difference from the front of the head to the back :aigo:
  5. I

    90 7mgte powered supra

    Worked for me last Summer, all I added was an electric booster water pump to help out when the AC was on in peak hour traffic :)
  6. I

    head gasket search

    Fogive Poodles he's new so still helpful and not at all jaded and cynical....... yet ;)
  7. I

    head gasket search

    <hint> Look between the head and the block ;)
  8. I

    Anyone used the RK/Beech bushings from Suprasport, or similar?

    Had my RK's in the car for many years/Km's now and recently inspected the rear uppers and am happy to report 0 wear, I have the Red bushes.
  9. I

    Engine Damper?

    Whole shitload of leverage on that little strut top bracket.
  10. I

    Clutch time.... Multi disk clutchs

    Some are better than others, I've built my own in the past based on off the shelf parts that were silent as I used drive straps on the floater.
  11. I

    Clutch time.... Multi disk clutchs

    Te rattle from my OSG drove me nuts if you get a chance try and ride/drive someone's car before dropping the coin Eric.
  12. I

    Ryan's 92 build thread aka NashMan

    It's more for the fact5 the vice jaws leave marks on the Al which become stress risers :( I just chop up some 38x38x6mm Al angle and use that.
  13. I

    90 7mgte powered supra

    10 blade engine fan and a good GTE fan clutch > Thermo's
  14. I

    90 7mgte powered supra

    Some late cars got 2x small Aux fans in the shroud and 1 in front of the AC condensor so maybe that's what he means.
  15. I

    TSA security useless when airline employee carries 9mm onto plane for passenger.

    I thought there had to be some procedure to transport thanks DM.
  16. I

    TSA security useless when airline employee carries 9mm onto plane for passenger.

    Surely there's a legal way he could have transported it? If so it's very suspect bypassing security like this.
  17. I

    Bearing clearances vs oil viscosity

    Rarely gets to 0c here and has only ever snowed twice in my lifetime and melted in minutes.
  18. I

    Bearing clearances vs oil viscosity

    <nodding> You have real Winter though so no surprise there :D
  19. I

    Bearing clearances vs oil viscosity

    That might have been piston slap though D, bottom end rattle has a unique sound (it sounds like $ pissed against a wall) ;)
  20. I

    Ryan's 92 build thread aka NashMan

    Looks good Ryan, please make some soft jaws for the Vise when working on nice Al parts ;)
Top Bottom