Search results

  1. I

    Code 31, and VERY loud, inconistant knock

    Won't know till you pull it down.
  2. I

    Code 31, and VERY loud, inconistant knock

    Sounds like it may have spun a bearing but you're not going to know till it's torn down and inspected, any running at all is now costing you $ in additional damage..
  3. I

    Code 31, and VERY loud, inconistant knock

    Personally I wouldn't run it again.
  4. I

    oil filter thread

    3/4-16 from memory Andy. (don't take that as gospel though that's for the NA filter not sure on a GTE never owned one)
  5. I

    Code 31, and VERY loud, inconistant knock

    What were the bearing clearences? What assembly lube was used?
  6. I

    Code 31, and VERY loud, inconistant knock

    What's the Oil Pressure?
  7. I

    Transmission pan bolt help

    Nah 6mm bolts will shear off at the heads ;)
  8. I

    Transmission pan bolt help

    19 in/lbs? It's actually 65in/lbs (about 5 ft/lbs), try 19ft/lbs and you'll snap them off.
  9. I

    new camaro or 89 supra???

    Camaro
  10. I

    Tremec TR-6060 (T56 Magnum).. Going to try it. Any coments. Interest....

    From memory there's a 15mm interference fit back in the tunnel between the seats, for me this was a show stopper as at that time my car was Virgin and I didn't want to cut into it, these days not so much ;)
  11. I

    bent UCA...wtf?

    How does the lower arm look? Looks like it's smacked a kerb pretty hard.
  12. I

    flywheel balance?

    Happens, this is why Scatter Shields exist. 1 sheet of .9mm steel doesn't stop a whole lot when they let go.
  13. I

    flywheel balance?

    Nope my implication is one flywheel explosion at high rpm releases a SHITLOAD of energy and shrapnel shortly followed by you waving bye bye to your legs and possibly your bum grapes ;)
  14. I

    flywheel balance?

    I like my legs ;)
  15. I

    bent UCA...wtf?

    Need pics Kyle, other than accident damage I can't see how an upper arm could bend.
  16. I

    coming back after 3 long years and need guidance

    13: All depends on how good a job was done though...
  17. I

    Issues Question

    You've asked all of this already.... Closed the older thread and reopened this one.
  18. I

    flywheel balance?

    Fix it properly..... :nono: It's bad enough you've had a cast flywheel lightened don't compound it buy a Cletus balance "fix"
  19. I

    Oil Pan Removal?

    Actually available at all motorcycle dealers as far as I know also skidoo dealers and it's at some parts stores labeled as 3bond, the others are all according to the dealer brand ie: HondaBond, YamaBond, SuziBond and so on. Never used the Permatex but have tried just about everything else I...
  20. I

    Plagiarism

    If you look in the FAQ, you find the following: It would be nice if people take content from SupraMania and post it verbatim on other forums to at least credit the author :nono:
Top Bottom