Search results

  1. I

    Toyota A-Series Transmission controller

    <<< pretty quick for an Old Fart ;)
  2. I

    My Oil cooler Set-up - Opinions Please

    A LOT of aftermarket installs don't run a steel extension tube on the Turbo so the Drain is subjected to much higher temps than that hose is rated for, just a word of warning to people reading this.
  3. I

    Contemplating a 7m swap into my e30 Bmw.

    What is the actual difference in the Euro motors? (wondering if it's not just a tune isse as the V6 in my project car is "Reduced Output" from the factory but is the same hardware as the more powerful engines)
  4. I

    I would like to sale this <whatever>.

    "Costed" "Grinded"... Arghhhh stop it NOW!!
  5. I

    Leecheater's rebuild, getting there

    Ditto :D
  6. I

    New to Site

    Welcome to SM guys! as above post up some pics if you have any and tell us about you and your car, the crew here are a good bunch of guys and the staff keep on top of the usual forum BS so it's a good place to visit.
  7. I

    what exactly can i expect out of 288/282 cam regrinds?

    Umm mine went straight in no reliefs needed.
  8. I

    Toyota A-Series Transmission controller

    32
  9. I

    Head Gasket thickness selection

    The mild bump in CR you'll get from having the head surfaced shouldn't make too much difference, ARP's+Comosite if you DON'T detonate it can stand up to a lot more than most here think... In my 3.4L Toyota V8 which has the same lame 4 bolts per cylinder design I ran low comp and 30psi on...
  10. I

    Head Gasket thickness selection

    Personally I wouldn't run a MHG without proper surface prep Aaron.
  11. I

    Harmonic Balancer Bolt Question

    Think he means the small tapped holes, m8x1.25 from memory.
  12. I

    Rod big end side clearance?

    Yep the stock Induction hardening isn't very deep.
  13. I

    what exactly can i expect out of 288/282 cam regrinds?

    1SZ-FE 1000cc Echo 13751-23030 5.12 13751-23040 5.14 13751-23050 5.16 13751-23060 5.18 13751-23070 5.20 13751-23080 5.22 13751-23090 5.24 13751-23100 5.26 13751-23110 5.28 13751-23120 5.30 13751-23130 5.32 13751-23140 5.34 13751-23150 5.36...
  14. I

    How hard would this be.

    Thought on a Cressida pump the top cover is the pickup?
  15. I

    went for a drive to cool off today

    Datsun crash was someone elses fault, Supra crash was one of those things that can happen to anyone... :( (nothing anyone could have done no matter how good a driver, I was a passenger once it broke the arm) "IF" it had happened the day before when we were up in the hills running the...
  16. I

    went for a drive to cool off today

    Scroll down to post #588 and have a read :( Ohhh and post #2413 in this one.... :(
  17. I

    what exactly can i expect out of 288/282 cam regrinds?

    Ran a pair of 280/351 thou lift sticks in my 7M, they were only 226@50 though so not nearly as aggressive as the ones you have, tuned right it idled like a kitten and made good power to 8000. YES it is now an interference engine ;)
  18. I

    went for a drive to cool off today

    As long as you do it safely!
  19. I

    went for a drive to cool off today

    Custom Koni coilovers Full Poly bushes in everything Whiteline Sway bars Falken 452 265/35/18 front 285/35/18 rears Detroit TrueTrac Diff SS stainless Track bars New Balljoints/spherical bushes IJ Spec alignment It was a very well sorted chassis at the end as I'd owned the car for 13...
  20. I

    went for a drive to cool off today

    Don't need HP to generate G Force ;)
Top Bottom