Search results

It is, but what whey are talking about as the chirping type sound it was making when the bov opens.....er.....doesn't open enough. I have a 50mm Tial copy on the way to me next week.

Yes, it has a simulated narrowband output you could run to the 52mm gauge and it would be a lot more accurate then a standard narrowband setup.

:love: :thumbup:

ZT-2 FTW! They just updated it with more cool sh-t. Now you can set it for a lean cruise where it will output a slightly richer signal on the narrowband output to trick the ecu and let you cruise at 14.7/1 up to 16/1 (adjustable, save gas on long drives!) They updated the software and the graphs...

Just saw it, and it was a great movie! They didn't screw it up at all. Great casting, great dialogue, and awesome special effects. Two thumbs up!

Delete.

There was going to be an in car kit, and I made one and shipped it already. The problem is that the cost and time to get the short (machine length) drill bits milled down to fit the 3/8" chuck was just too much. If I was selling a lot of them then I would do it like 10 at a time, but there is...

Really? The tap handle is supposed to be for 1/4" to 1/2" taps but it is a different brand then the first one I used. On mine I just unscrewed the nut all the way out and it went right in. I'll check that out before I buy more of those, thanks for the heads up!

:biglaugh: Still got it, and I know i'm over 400ft/lbs now! It's actually a TRD pp but it is made for TRD by ACT, exact same thing. Stock disk FTW! Sometime the multi puck disks can be a little hard to drive, sometimes they feel almost like stock. I think the sprung hub is a good idea. At...

"Block was done by me". That means cleaning it but no surfacing? Do a block test to check for exhaust in the coolant. Sounds like a bhg. Highly unlikely there is a blockage that would cause your overheating like that, at least not without obvious signs of corrosion or debris buildup in the...

:biglaugh: :biglaugh: :biglaugh: :biglaugh: :biglaugh: :biglaugh: :biglaugh:

Neither car is all that bad, just not something I would do to a car. I hope no one gets offended, but when you do a mod like that on your car you must expect that 50% of people will probably not approve.

I have a 2.5" universal set, and all the other fittings needed to make it work on the mk3, comes out to about $250 in total. Thats everything to go from the 3000 pipe to the turbo. You can also replace the 3k pipe with one extra 2.5" to 2.75" reducer...

Worse then Lamarossa's Supra!

please nooooooooooooo

I posted this in another thread but I figured it should be in this one too. www.driftmotion.com/car pc.wmv The first song is so terrible, and it was very sunny. Video was from my digital camera too, it sounds far better then it sounds :icon_razz You can build a pc for your car for under...

The pcv system is what gets oil in there. A light coat inside the pipes is common. Yes, you can run 2.5" piping and it will be fine. You will just need some reducers to go to the turbo, intercooler and 3000 pipe.

The problem is that once there is a little oil inside the piping the stock clamps can not get tight enough to keep the hose from popping off. T-bolt clamps will fix that issue. The lower ic is also known to crack, and it's hard to see without removing the accordion pipe. I never use worm-drive...

Screw me if I am wrong, but haven't we met before? I'd like to kiss you passionately on the lips, then move up to your belly button. Why don't you get down on your knees and smile like a doughnut?

I like this one for some reason :icon_wink