Search results

  1. I

    DO NOT BUY Powerspirit CT26

    Didn't answer the Cam question...
  2. I

    Head Gasket thickness selection

    Cometic make the gaskets for Titan, don't start stressing over a .1 difference in the real would unless you're building a class race engine it's going to make 0 difference.
  3. I

    DO NOT BUY Powerspirit CT26

    So you bought an upgrade kit? Who is assembling and balancing it? You never answered my question about the TRD Cams or removed "Stroker" from your Sig...:nono:
  4. I

    Head Gasket thickness selection

    20 thou isn't going to make much of a difference to the CR or gasket used, the "stock" bore MHG's are already oversize in the hole. Stoppers are only available in the 86mm bore but are overkill for 99% of 7M builds.
  5. I

    Head Gasket thickness selection

    2mm will do it fine if your math is correct.
  6. I

    NPR pistons and rings.. Reliable?

    What were the End Gaps set to?
  7. I

    7M build advise please

    Make sure you check the front rivet in the MHG for interference Dan.
  8. I

    Difference between ct26 60 trim and ct26 60-1?

    I used a pair of TurboSmart type 3's with cut down springs and large bore reference lines in my carf with the T04z.
  9. I

    Difference between ct26 60 trim and ct26 60-1?

    Huge mismatch between Turbine and Compressor = Surge Monster, as Albert said most people have the PoS stock bypass valve, T04Z is a good example of a Surge Monster you need to run a very active BoV...
  10. I

    adjusting the Afpr

    You'd think so but not always the case :D
  11. I

    adjusting the Afpr

    The "Young" thing will improve with time ;)
  12. I

    adjusting the Afpr

    There is such a thing as rich detonation, rare but it can happen. My learning experience was my first car, bought a junkyard 5.0L Holden V8 for it hammered the crap out of it and kept breaking the Skirts off one piston at a time, repaired it a bunch of times before biting the bullet and...
  13. I

    adjusting the Afpr

    It's a lesson we all learn at some point but quite a few here don't "get it" the first 5>10 times... ;)
  14. I

    adjusting the Afpr

    Racing while the car was lame doesn't seem like such a good idea now I bet :(
  15. I

    adjusting the Afpr

    Bit of a heads up where the SS line is routed over/behind the Alternator, INSULATE it there have been a few cars burn to the ground when the line has shorted.
  16. I

    You know you're a Supra owner when...

    When those lists are one in the same ;)
  17. I

    inspire me with pics of "your" garage...

    It's an office space I'm using to store bits and pieces, one day I'll get the racks and mezzanine done and it'll be an office again!
  18. I

    My FIRST car - Aloshan's 2JTHIS

    Not a member can't view it, might be an idea to remove "Stroked" from your sig then, next questions is are you SURE it has the TRD Cams?
  19. I

    My FIRST car - Aloshan's 2JTHIS

    Which Stroker crank is in your car and what's the capacity now?
  20. I

    Blew my 7M, what should I do?

    Get a job as a Porn actor?? ;)
Top Bottom